[linux-dvb] DiBcom MOD3000 driver gone?

[Gabriele Turchi]

Il giorno mar, 21/02/2006 alle 16.28 +0100, Patrick Boettcher ha
scritto:
> Hi,
> 
> On Sun, 19 Feb 2006, Gabriele Turchi wrote:
> > I have an old VisionPlus USB 1.1 dvb-t VP-7041E, running flawless on a
> > fedora 3 with dvb_dibusb driver (well, the signal is very low..). When
> > connecting the unit, in dmesg I read:
> >
> >    drivers/media/dvb/dibusb/dvb-dibusb-core.c: DiBcom USB1.1 DVB-T
> >      reference design (MOD3000) successfully initialized and connected.
> >
> > Today I attached the same unit to a fedora 4 AMD64 (x86_64) equipped PC,
> > and nothing happened... I don't see anything in dmesg after the
> >
> >    usb 2-5: new full speed USB device using ohci_hcd and address 4
> >
> > Apparently, searching in 2.6.15 sources, the VID and PID are still in
> > dvb-usb-ids.h, but only there...
> 
> Hmm, what are your USB IDs?
> 

Cold:

VID:	USB_VID_ANCHOR			0x0547
PID:	USB_PID_DIBCOM_ANCHOR_2135_COLD	0x2131


Warm (on fedora 3 - 2.6.11-1.27_FC3 - dvb-dibusb-5.0.0.11.fw):

VID:	USB_VID_DIBCOM			0x10b8 
PID:	USB_PID_DIBCOM_MOD3000_WARM     0x0bb9


> best regards,
> Patrick.
> 

Best regards,
Gabriele

> --
>    Mail: patrick.boettcher at desy.de
>    WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/