[linux-dvb] Problem with a WinTV-NOVA-CI PCI Card and 2.6.14 kernel

Christophe Burgalat c.burgalat at broadcastavenue.com
Tue Jan 3 16:38:03 CET 2006


Hi Mike,

I did not test without the CAM module inserted.
And you're right, it works fine if I remove the CAM.

But I confirm that It works perfectly using the dvb-kernel drivers for 2.4 
kernel with the CAM module. So I suppose there is a solution to this problem.
It seems also to concern other PCI card like the KNC1

Christophe

Le Mardi 3 Janvier 2006 16:14, Michael Ditum a écrit :
> Hi Christophe,
>
> I'm having the same issue as you. I have posted a thread...
> http://www.linuxtv.org/pipermail/linux-dvb/2005-December/006906.html but
> have had no solution yet.
>
> The only thing I have worked out is that if I remove the CAM it works fine,
> I only get the filter timeout with the CAM inserted.
>
> Mike
>
> On 30/12/05, Christophe Burgalat <c.burgalat at broadcastavenue.com> wrote:
> > Hi,
> >
> > I have a WinTV-Nova-CI PCI card.
> > I use this card for some months and It works perfectly using kernel
> > 2.4and dvb drivers for 2.4
> >
> > I try now to use 2.6 new kernel but I did not succeed to make it works.
> > I use dvbscan application and I have the following messages :
> >
> > "using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> > WARNING: filter timeout pid 0x0011
> > WARNING: filter timeout pid 0x0000
> > dumping lists (0 services)
> > Done."
> >
> > It seems that tuning succeed but then nothing is received.
> >
> > I've tried to use 2.6.14.2 and 2.6.14.4 kernel (with udev), I also try
> > cvs dvb
> > drivers.
> > I use the latest dvb-ttpci firmware.
> >
> > Here is the output of the dmesg command :
> >
> > "saa7146: register extension 'dvb'.
> > saa7146: register extension 'budget_ci dvb'.
> > saa7146: found saa7146 @ mem ce868000 (revision 1, irq 5)
> > (0x13c2,0x100f). DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI
> > PCI).
> > adapter has MAC addr = 00:d0:5c:23:c9:3f
> > budget_ci: CI interface initialised
> > dvb_ca adapter 0: DVB CAM detected and initialised successfully
> > DVB: registering frontend 0 (ST STV0299 DVB-S)...
> > "
> >
> > Output of the lsmod command:
> >
> > "
> > Module                  Size  Used by
> > budget_ci              14016  0
> > tda1004x               13668  1 budget_ci
> > budget_core             9796  1 budget_ci
> > dvb_ttpci             329188  0
> > l64781                  7268  1 dvb_ttpci
> > saa7146_vv             46144  1 dvb_ttpci
> > ves1820                 5956  1 dvb_ttpci
> > tda8083                 6084  1 dvb_ttpci
> > stv0297                 7712  2 budget_ci,dvb_ttpci
> > sp8870                  7468  1 dvb_ttpci
> > firmware_class         10112  4 budget_ci,tda1004x,dvb_ttpci,sp8870
> > ves1x93                 6692  1 dvb_ttpci
> > ttpci_eeprom            2880  2 budget_core,dvb_ttpci
> > saa7146                18088  4
> > budget_ci,budget_core,dvb_ttpci,saa7146_vv stv0299                10856 
> > 2 budget_ci,dvb_ttpci
> > i2c_core               21152  12
> >
> > budget_ci,tda1004x,budget_core,dvb_ttpci,l64781,ves1820,tda8083,stv0297,s
> >p8870,ves1x93,ttpci_eeprom,stv0299 dvb_core               77384  3
> > budget_ci,budget_core,dvb_ttpci
> > video_buf              21284  1 saa7146_vv
> > "
> >
> >
> > Any idea ??
> >
> > Thanks
> > Christophe
> >
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb at linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb



More information about the linux-dvb mailing list