[linux-dvb] dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem 1822/0001

[Benedict White]

On 5 Jan 2006 at 23:00, Manu Abraham wrote:

> Hello Benedict,
> 
> Benedict White wrote:
> 
> >>You should see:
> >>
> >>corbin3:~# ll /dev/dvb/adapter1/
> >>total 0
> >>drwxr-xr-x 2 root root 120 Jan 2 19:06 . 
> >>drwxr-xr-x 4 root root 80 Jan 2 19:06 ..
> >>crw-rw---- 1 root video 212, 68 Jan 2 19:06 demux0
> >>crw-rw---- 1 root video 212, 69 Jan 2 19:06 dvr0
> >>crw-rw---- 1 root video 212, 67 Jan 2 19:06 frontend0
> >>crw-rw---- 1 root video 212, 71 Jan 2 19:06 net0
> >>
> >>    
> >>
> >
> >Cool. I think I am only missing the front end.
> >
> >  
> >
> 
> The changes were a bit experimental in the sense that we planned to add 
> h/w tuning support too, hence i did not commit to linuxtv.org CVS.
> I think if you need a fix before things are back to normal, probably 
> Mark can help you out in the meantime for the updated tree.
> 

Many thanks. Unfortunately the problem remains. I get this from 
kernel.log:

Jan  6 15:29:39 freevo bttv: driver version 0.9.16 loaded
Jan  6 15:29:39 freevo bttv: using 8 buffers with 2080k (520 pages) 
each for capture
Jan  6 15:29:39 freevo bttv: Bt8xx card found (0).
Jan  6 15:29:39 freevo ACPI: PCI Interrupt Link [LNKA] enabled at 
IRQ 11
Jan  6 15:29:39 freevo PCI: setting IRQ 11 as level-triggered
Jan  6 15:29:39 freevo ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link 
[LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan  6 15:29:39 freevo bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 11, 
latency: 64, mmio: 0xdddfe000
Jan  6 15:29:39 freevo bttv0: detected: Twinhan VisionPlus DVB 
[card=113], PCI subsystem ID is 1822:0001
Jan  6 15:29:39 freevo bttv0: using: Twinhan DST + clones 
[card=113,autodetected]
Jan  6 15:29:39 freevo bttv0: gpio: en=00000000, out=00000000 
in=00ffffff [init]
Jan  6 15:29:39 freevo bttv0: using tuner=4
Jan  6 15:29:39 freevo bttv0: add subdevice "dvb0"
Jan  6 15:29:39 freevo bt878: AUDIO driver version 0.0.0 loaded
Jan  6 15:29:39 freevo bt878: Bt878 AUDIO function found (0).
Jan  6 15:29:39 freevo ACPI: PCI Interrupt 0000:00:0c.1[A] -> Link 
[LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan  6 15:29:39 freevo bt878(0): Bt878 (rev 17) at 00:0c.1, irq: 11, 
latency: 64, memory: 0xdddff000
Jan  6 15:29:39 freevo DVB: registering new adapter (bttv0).
Jan  6 15:29:39 freevo dst_probe: unknown device.
Jan  6 15:29:39 freevo frontend_init: Could not find a Twinhan DST.
Jan  6 15:29:39 freevo dvb-bt8xx: A frontend driver was not found for 
device 109e/0878 subsystem 1822/0001


An ls of /dev/dvb/adapter0/ gives:
[root at freevo ~]# ls -l /dev/dvb/adapter0/
total 0
crw-rw----  1 root video 212, 4 2006-01-06 15:29 demux0
crw-rw----  1 root video 212, 5 2006-01-06 15:29 dvr0
crw-rw----  1 root video 212, 7 2006-01-06 15:29 net0

So still no frontend driver.

Umm...

My modprobe line looks like this:

dst dst_algo=0


Is there anything else I should be doing?

Kind regards


Benedict White