[linux-dvb] Dvico Fusion DVB-T and 2.6.14 compiling issue

strangedodgydude at kiwiland.dyndns.org strangedodgydude at kiwiland.dyndns.org
Thu Jan 12 02:55:44 CET 2006


Now I am a little confused.
I am following the following walk through,
http://wilsonet.com/mythtv/fcmyth.php
Assuming the drivers are already installed (as message shows the loading
of the driver) how do I get the test/channel scanner to connect to it?

Extract of /var/log/message
Jan 11 06:53:42 mythy kernel: bttv0: Bt878 (rev 17) at 0000:02:00.0, irq:
9, lat
ency: 32, mmio: 0xf4000000
Jan 11 06:53:42 mythy kernel: bttv0: detected: DViCO FusionHDTV DVB-T Lite
[card
=128], PCI subsystem ID is 18ac:db10
Jan 11 06:53:42 mythy kernel: bttv0: using: DViCO FusionHDTV DVB-T Lite
[card=12
8,autodetected]
Jan 11 06:53:42 mythy kernel: bttv0: using tuner=-1
Jan 11 06:53:43 mythy kernel: bttv0: add subdevice "dvb0"





> strangedodgydude at kiwiland.dyndns.org wrote:
>
>>I am running fedora Core 4 and have a Dvico Fusion DVB-t lite HDTV card.
>> I
>>have updated my freshly built box with Yum and have download the Linux
>>driver from Chris Pascoe's site and applied the latest patch.
>>
>>The problem I am getting is when I try to compile the driver I get the
>>following error.
>>
>>Can't seem to find anyone else with these issues.
>>
>>
> Don't use the driver from Chris's site... It has been included in the
> vanilla kernel for a long time now.
>
> Any recent kernel will come with support out-of-the-box... I think his
> driver was added around 2.6.10 days, but was marked broken for a little
> while... It is currently supported in v4l-dvb cvs when compiled against
> 2.6.12 or later.
>
> http://www.linuxtv.org/v4lwiki/index.php/How_to_build_from_CVS
>
> Hope this helps,
>
> Mike
>




More information about the linux-dvb mailing list