[linux-dvb] using nxt200x in the flexcop driver
mkrufky at gmail.com
Mon Jan 16 20:27:23 CET 2006
On 1/15/06, Kirk Lapray <kirk.lapray at gmail.com> wrote:
> Without having a NXT2002 card to try I am not sure how much I will be able
> to help.
> Just by looking at what is going on here it looks like the tuner might not
> be changing. The way I wrote the nxt200x module was by taking taking the
> nxt2002 and nxt2004 modules and combining them into one. A lot of pieces of
> code were the same and were easily merged. Other places were completely
> different and a simple case function calls the appropriate code. A good
> place to start would be by looking at the nxt2002 and nxt200x code and
> comparing them for the NXT2002 chip. Most likely there is something that I
> just overlooked when I put in the nxt2002 code. You could also try turning
> on debug in the nxt200x and dvb-pll modules and see if that could give us
> some more information on exactly what is going on.
Thanks for the speedy reply. :-) I thought I'd write you an email to
let you know where things were at before I got down & dirty into this
code. It looks like I'll just have to do a side-by-side comparison of
the i2c registers that get changed, etc..... Doesnt seem like it
should be too difficult... I'll let you know how things turn out.
More information about the linux-dvb