[linux-dvb] Compro, VideoMate U3, 1ME03UQUM15, USB id eb1a:2870

James Cameron quozl at us.netrek.org
Mon Jun 5 11:46:14 CEST 2006


On Sun, Jun 04, 2006 at 06:36:54PM +0200, Gunther Mayer wrote:
> Try "modprobe em28xx" and post the results.

Here's the results of "modprobe em28xx i2c_scan=1"

Linux video capture interface: v1.00
em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device (eb1a:2870): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
em28xx #0: Your board has no eeprom inside it and thus can't
em28xx #0: be autodetected.  Please pass card=<n> insmod option to
em28xx #0: workaround that.  Redirect complaints to the vendor of
em28xx #0: the TV card. Generic type will be used.em28xx #0: Best regards,
em28xx #0:         -- tux
em28xx #0: em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
em28xx #0:     card=0 -> Unknown EM2800 video grabber
em28xx #0:     card=1 -> Generic EM2820 video grabber
em28xx #0:     card=2 -> Terratec Cinergy 250 USB
em28xx #0:     card=3 -> Pinnacle PCTV USB 2
em28xx #0:     card=4 -> Hauppauge WinTV USB 2
em28xx #0:     card=5 -> MSI VOX USB 2.0
em28xx #0:     card=6 -> Terratec Cinergy 200 USB
em28xx #0:     card=7 -> Leadtek Winfast USB II
em28xx #0:     card=8 -> Kworld USB2800
em28xx #0:     card=9 -> Pinnacle Dazzle DVC 90
em28xx #0:     card=10 -> Hauppauge WinTV HVR 900
em28xx #0:     card=11 -> Terratec Hybrid XS
em28xx #0:     card=12 -> Kworld PVR TV 2800 RF
em28xx #0:     card=13 -> Terratec Prodigy XS
em28xx #0:     card=14 -> Videology 20K14XUSB USB2.0
em28xx #0:     card=15 -> Usbgear VD204v9
em28xx #0:     card=16 -> Terratec Cinergy T XS
em28xx #0:     card=17 -> Generic EM2870 video grabber
em28xx #0:     card=18 -> Pinnacle PCTV DVB-T
em28xx #0:     card=19 -> Generic EM2881 video grabber
em28xx #0:     card=20 -> DNT DA2 Hybrid
em28xx #0:     card=21 -> Pinnacle Hybrid Pro
em28xx #0:     card=22 -> Terratec Hybrid XS Secam
em28xx #0:     card=23 -> Hercules Smart TV USB 2.0
em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 40 12 62 40 6a 1c 00 00
em28xx #0: i2c eeprom 10: 00 00 04 57 0e 1d 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 04 00 00 00 f0 10 01 00 00 00 00 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 1c 03 56 00 69 00
em28xx #0: i2c eeprom 70: 64 00 65 00 6f 00 4d 00 61 00 74 00 65 00 20 00
em28xx #0: i2c eeprom 80: 55 00 33 00 00 00 63 00 65 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= eb1a:2870
No audio on board.
500mA max power
Table at 0x04, strings=0x1c6a, 0x0000, 0x0000
em28xx #0: found i2c device @ 0x1e [zl10353/mt352 dvb-t demodulator]
em28xx #0: found i2c device @ 0xa0 [eeprom]
em28xx #0: Found Generic EM2870 video grabber
usbcore: registered new driver em28xx

-- 
James Cameron    mailto:quozl at us.netrek.org     http://quozl.netrek.org/



More information about the linux-dvb mailing list