[linux-dvb] Dvb-T card seen as a DVB-S

Alan alan.crevon at wanadoo.fr
Thu Jun 8 10:48:21 CEST 2006


Hi all.

just bought a usb dvb-t card for the first time, i compiled your dvb  
drivers, found the needed firmware, plugged the card (power led truned on)  
everything was allright until now... i'm trying to scan channels but i  
have this error  (using ./scan):

	WARNING: frontend type (QPSK) is not compatible with requested tuning  
type (OFDM )
	ERROR: initial tuning failed

Here is what i get from dmesg, when pluging the card in :

	usb 2-2: new full speed USB device using uhci_hcd and address 2
	dvb-usb: found a 'Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)' in  
cold state, will try to load a firmware
	dvb-usb: downloading firmware from file 'dvb-usb-dibusb-an2235-01.fw'
	usbcore: registered new driver dvb_usb_dibusb_mb
	usb 2-2: USB disconnect, address 2
	dvb-usb: generic DVB-USB module successfully deinitialized and  
disconnected.
	usb 2-2: new full speed USB device using uhci_hcd and address 3
	dvb-usb: found a 'DiBcom USB1.1 DVB-T reference design (MOD3000)' in warm  
state.dvb-usb: will use the device's hardware PID filter (table count: 16).
	DVB: registering new adapter (DiBcom USB1.1 DVB-T reference design  
(MOD3000)).
	DVB: registering frontend 0 (0 Ë)...
	dibusb: This device has the Thomson Cable onboard. Which is default.
	dvb-usb: schedule remote query interval to 150 msecs.
	dvb-usb: DiBcom USB1.1 DVB-T reference design (MOD3000) successfully  
initialized and connected.
	usbcore: registered new driver DiBcom based USB Budget DVB-T device

I guess everything here is normal...

i can't remember if i got the firmware from the web interface extractor  
 from windows drivers or from the mandriva rpm... any idea would be  
apreciated.

Cheers.

alan

-- 
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/



More information about the linux-dvb mailing list