[linux-dvb] Patch 18 / 50: code cleanup for dvbbt8xx

[Uwe Bugla]

#Applies against: 2.6.17
#Signed-off-by: Uwe Bugla <uwe.bugla at gmx.de>
#Changes: wipes out uncommented material, eliminates code redundancies for #two cards needing exactly the same code functions as the third one
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c	2006-05-27 14:03:00
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c	2006-05-27 15:35:00
@@ -51,9 +51,6 @@
 static void dvb_bt8xx_task(unsigned long data)
 {
 	struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *)data;
-
-	//printk("%d ", card->bt->finished_block);
-
 	while (card->bt->last_block != card->bt->finished_block) {
 		(card->bt->TS_Size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter)
 			(&card->demux,
@@ -810,22 +807,7 @@
 
 	switch(sub->core->type) {
 	case BTTV_BOARD_PINNACLESAT:
-		card->gpio_mode = 0x0400c060;
-		/* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
-			      BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
-		card->op_sync_orin = BT878_RISC_SYNC_MASK;
-		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
-		break;
-
 	case BTTV_BOARD_DVICO_DVBT_LITE:
-		card->gpio_mode = 0x0400C060;
-		card->op_sync_orin = BT878_RISC_SYNC_MASK;
-		card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
-		/* 26, 15, 14, 6, 5
-		 * A_PWRDN  DA_DPM DA_SBR DA_IOM_DA
-		 * DA_APP(parallel) */
-		break;
-
 	case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
 		card->gpio_mode = 0x0400c060;
 		card->op_sync_orin = BT878_RISC_SYNC_MASK;

-- 


"Feel free" – 10 GB Mailbox, 100 FreeSMS/Monat ...
Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail