[linux-dvb] No frontend driver found with 2.6.17

Thomas Schmidt tschmidt at debian.org
Wed Jun 28 23:18:49 CEST 2006


* Andrew de Quincey schrieb am 28.06.06, um 20:35 Uhr:
> OK, can you try the following:
> 
> in drivers/media/dvb/ttpci/budget-av.c/frontend_init.c():
> 
> There is a section:
>         switch (saa->pci->subsystem_device) {
>                 case SUBID_DVBS_KNC1_PLUS:
>                 case SUBID_DVBC_KNC1_PLUS:
>                 case SUBID_DVBT_KNC1_PLUS:
>                         // Enable / PowerON Frontend
>                         saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
>                         saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
>                         break;
>         }
> 
> 
> Add "case SUBID_DVBS_CYNERGY1200N:" to that list and see if it works now.

Yes, this works, i can confirm that the patch works with -rc5 and 
2.6.17.1. Thank you very much.

> I'm wondering what the difference between your card and  the others is - any 
> ideas?

Well, i guess it is a new revision of the Cinergy DVB-S 1200. The most
visible difference to the pictures of older Cinergy DVB-S 1200 like
this one: http://www.vdr-wiki.de/wiki/index.php/Bild:Cinergy1200DVB-s.JPG
is that my card has a LNB-Out-Connector and the PCI-connector of my
card is set to support both voltages, 3,3V and 5V.


Regards,
Thomas

-- 
Thomas Schmidt, Debian VDR Team
http://pkg-vdr-dvb.alioth.debian.org/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : http://www.linuxtv.org/pipermail/linux-dvb/attachments/20060628/43f3e66d/attachment.pgp


More information about the linux-dvb mailing list