[linux-dvb] Re: DViCO Dual Digital 2 remote control

Nathan Webb nathanwebbau at yahoo.com.au
Sat Oct 7 03:01:07 CEST 2006


Can anyone help with this?
 
 Still having no success in getting the remote control to work with the DViCO dual digital 2.  The tuners work fine, and mythtv is working with the keyboard.  I had installed the drivers at the start of the month, just after Michael created a patch.
 
 The box is running FC5, vanilla 2.6.17-1.2187_FC5 kernel.
 
 When dvb-usb is loaded with "debug=32" and dvb-usb-cxusb module is loaded with "debug=1", dmesg prints the following:
 
 dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 2' in warm state.
 dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
 DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Digital 2).
 dvb-usb: recv bulk message failed: -110
 DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
 key map size: 45
 setting bit for event 377 item 0
 setting bit for event 391 item 1
 setting bit for event 389 item 2
 setting bit for event 364 item 3
 setting bit for event 141 item 4
 setting bit for event 356 item 5
 setting bit for event 365 item 6
 setting bit for event 158 item 7
 setting bit for event 139 item 8
 setting bit for event 103 item 9
 setting bit for event 105 item 10
 setting bit for event 106 item 11
 setting bit for event 108 item 12
 setting bit for event 352 item 13
 setting bit for event 358 item 14
 setting bit for event 15 item 15
 setting bit for event 165 item 16
 setting bit for event 163 item 17
 setting bit for event 28 item 18
 setting bit for event 115 item 19
 setting bit for event 114 item 20
 setting bit for event 402 item 21
 setting bit for event 403 item 22
 setting bit for event 212 item 23
 setting bit for event 386 item 24
 setting bit for event 134 item 25
 setting bit for event 2 item 26
 setting bit for event 3 item 27
 setting bit for event 4 item 28
 setting bit for event 5 item 29
 setting bit for event 6 item 30
 setting bit for event 7 item 31
 setting bit for event 8 item 32
 setting bit for event 9 item 33
 setting bit for event 10 item 34
 setting bit for event 371 item 35
 setting bit for event 11 item 36
 setting bit for event 372 item 37
 setting bit for event 168 item 38
 setting bit for event 164 item 39
 setting bit for event 208 item 40
 setting bit for event 113 item 41
 setting bit for event 128 item 42
 setting bit for event 167 item 43
 setting bit for event 116 item 44
 input: IR-receiver inside an USB DVB receiver as /class/input/input2
 dvb-usb: schedule remote query interval to 150 msecs.
 dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 2 successfully initialized and connected.
 dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 2' in warm state.
 dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
 DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Digital 2).
 dvb-usb: recv bulk message failed: -110
 DVB: registering frontend 1 (Zarlink ZL10353 DVB-T)...
 key map size: 45
 setting bit for event 377 item 0
 setting bit for event 391 item 1
 setting bit for event 389 item 2
 setting bit for event 364 item 3
 setting bit for event 141 item 4
 setting bit for event 356 item 5
 setting bit for event 365 item 6
 setting bit for event 158 item 7
 setting bit for event 139 item 8
 setting bit for event 103 item 9
 setting bit for event 105 item 10
 setting bit for event 106 item 11
 setting bit for event 108 item 12
 setting bit for event 352 item 13
 setting bit for event 358 item 14
 setting bit for event 15 item 15
 setting bit for event 165 item 16
 setting bit for event 163 item 17
 setting bit for event 28 item 18
 setting bit for event 115 item 19
 setting bit for event 114 item 20
 setting bit for event 402 item 21
 setting bit for event 403 item 22
 setting bit for event 212 item 23
 setting bit for event 386 item 24
 setting bit for event 134 item 25
 setting bit for event 2 item 26
 setting bit for event 3 item 27
 setting bit for event 4 item 28
 setting bit for event 5 item 29
 setting bit for event 6 item 30
 setting bit for event 7 item 31
 setting bit for event 8 item 32
 setting bit for event 9 item 33
 setting bit for event 10 item 34
 setting bit for event 371 item 35
 setting bit for event 11 item 36
 setting bit for event 372 item 37
 setting bit for event 168 item 38
 setting bit for event 164 item 39
 setting bit for event 208 item 40
 setting bit for event 113 item 41
 setting bit for event 128 item 42
 setting bit for event 167 item 43
 setting bit for event 116 item 44
 input: IR-receiver inside an USB DVB receiver as /class/input/input3
 dvb-usb: schedule remote query interval to 150 msecs.
 dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 2 successfully initialized and connected.
 usbcore: registered new driver dvb_usb_cxusb
 
 Here is the output from "cat /proc/bus/input/devices":
 
 I: Bus=0003 Vendor=0fe9 Product=db59 Version=0300
 N: Name="IR-receiver inside an USB DVB receiver"
 P: Phys=usb-0000:00:05.2-1/ir0
 S: Sysfs=/class/input/input2
 H: Handlers=kbd event0
 B: EV=3
 B: KEY=c00a4 2183051 0 0 0 0 110000 1b8 40002841 1e1680 0 0 10008ffc
 
 I: Bus=0003 Vendor=0fe9 Product=db59 Version=0300
 N: Name="IR-receiver inside an USB DVB receiver"
 P: Phys=usb-0000:00:05.2-2/ir0
 S: Sysfs=/class/input/input3
 H: Handlers=kbd event1
 B: EV=3
 B: KEY=c00a4 2183051 0 0 0 0 110000 1b8 40002841 1e1680 0 0 10008ffc
 
 So at this stage it looks like everything is working correctly, but that's as far as I can get!  Using input-events (from the input tools package) comes up with nothing on both event0 and event1.  None of the lirc tools show anything either, nor does "cat /dev/input/event[01]".
 
 Thanks,
 Nathan Webb
 
      From: Nathan Webb <nathanwebb at fastmail.fm>
     To: linux-dvb at linuxtv.org
     Subject: DViCO Dual Digital 2 remote control
     Date: Mon, 02 Oct 2006 12:37:35 +1000
     
 
Hi,

Following on from suggestions by Michael Krufky in this list, I've
managed to get this tuner card working (thanks Mike!), almost perfectly.
The only problem now is that the remote isn't working.

The drivers appear to be loading correctly, so that the entries appear
in /proc/bus/input/devices and both /dev/input/event0 and event1 are
created.

However, nothing appears under 'cat /dev/input/event[0|1]' when I press
the buttons.  I've tried it under a windows partition, and it works
there, so it's not the hardware.  irrecord doesn't pick up anything
either (as you'd expect) when trying 'lircd -H dev/input
-d /dev/input/event[0|1]'.

Please help!  I really don't want to use windows just to be able to use
the remote!

On another note, does anyone know how to change IRQ priorities?  The
wireless card has been given a lower IRQ (even after physically swapping
slots), and the BIOS won't help.  Network traffic causes glitches :(

Thanks,
Nathan Webb 
  
 		
---------------------------------
Do you Yahoo!?
  Join the Girlfriend magazine VIP Club for inside info, freebies and more 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20061007/f592a52f/attachment.htm


More information about the linux-dvb mailing list