[linux-dvb] KWorld VStream XPert DVB-T card fails to lock kernel 2.6.18

Babstar debian-list at blueturtles.com
Wed Sep 27 07:20:08 CEST 2006


Hello,
          I just upgraded to kernel 2.6.18 and my Kworld V-Stream DVB-T
card now fails to lock, whereas everything was fine with 2.6.17.


Here is a copy of dmesg & lsmod


--
Ben


# dmesg
 000000001fff8000 (ACPI data)
 BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000fb880
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 126960 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 AMI                                   ) @ 0x000fa710
ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: MADT (v001 AMIINT VIA_K7   0x00000009 MSFT 0x00000097) @ 0x1fff00c0
ACPI: DSDT (v001    VIA   VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:6 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Detected 1399.849 MHz processor.
Built 1 zonelists.  Total pages: 131056
Kernel command line: root=/dev/hda2 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 516700k/524224k available (1543k kernel code, 6972k reserved,
560k data, 152k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2801.09 BogoMIPS
(lpj=1400547)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(tm) XP 1600+ stepping 02
Checking 'hlt' instruction... OK.
ACPI: Core revision 20060707
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb21, last bus=1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a
report
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: d1e00000-d3efffff
  PREFETCH window: c1c00000-d1cfffff
PCI: Bus 2, cardbus bridge: 0000:00:06.0
  IO window: 00001000-000010ff
  IO window: 00001400-000014ff
  PREFETCH window: 30000000-31ffffff
  MEM window: 32000000-33ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:06.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Machine check exception polling timer started.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports 16 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin
is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST3300831A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ST3300622A, ATA DISK drive
hdd: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63,
UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
hdc: max request size: 512KiB
hdc: 586072368 sectors (300069 MB) w/16384KiB Cache, CHS=36481/255/63,
UDMA(100)
hdc: cache flushes supported
 hdc: hdc1
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 152k freed
input: AT Translated Set 2 keyboard as /class/input/input0
NET: Registered protocol family 1
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:11.2[D] -> GSI 12 (level, low) -> IRQ 12
uhci_hcd 0000:00:11.2: UHCI Host Controller
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:11.2: irq 12, io base 0x0000e000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:11.3[D] -> GSI 12 (level, low) -> IRQ 12
uhci_hcd 0000:00:11.3: UHCI Host Controller
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:11.3: irq 12, io base 0x0000e400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ACPI: PCI Interrupt 0000:00:11.4[D] -> GSI 12 (level, low) -> IRQ 12
uhci_hcd 0000:00:11.4: UHCI Host Controller
uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:11.4: irq 12, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: PC Speaker as /class/input/input1
Linux video capture interface: v2.00
hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Yenta: CardBus bridge found at 0000:00:06.0 [14ef:0101]
usb 1-2: new low speed USB device using uhci_hcd and address 2
Yenta: ISA IRQ mask 0x0000, PCI irq 169
Socket status: 30000410
cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 177
CORE cx88[0]: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T
[card=14,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
cx2388x dvb driver version 0.0.6 loaded
usb 1-2: configuration #1 chosen from 1 choice
input: cx88 IR (KWorld/VStream XPert D as /class/input/input2
cx88[0]/0: found at 0000:00:05.0, rev: 5, irq: 177, latency: 32, mmio:
0xde000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
ACPI: PCI Interrupt 0000:00:05.2[A] -> GSI 16 (level, low) -> IRQ 177
cx88[0]/2: found at 0000:00:05.2, rev: 5, irq: 177, latency: 32, mmio:
0xdf000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
CORE cx88[1]: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T
[card=14,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
input: cx88 IR (KWorld/VStream XPert D as /class/input/input3
ACPI: PCI Interrupt 0000:00:07.2[A] -> GSI 18 (level, low) -> IRQ 185
cx88[1]/2: found at 0000:00:07.2, rev: 5, irq: 185, latency: 32, mmio:
0xdd000000
cx88[1]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[1]).
DVB: registering frontend 1 (Zarlink MT352 DVB-T)...
CORE cx88[2]: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T
[card=14,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
irda_init()
NET: Registered protocol family 23
pccard: PCMCIA card inserted into slot 0
input: cx88 IR (KWorld/VStream XPert D as /class/input/input4
ACPI: PCI Interrupt 0000:00:08.2[A] -> GSI 19 (level, low) -> IRQ 193
cx88[2]/2: found at 0000:00:08.2, rev: 5, irq: 193, latency: 32, mmio:
0xdb000000
cx88[2]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[2]).
DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 185
cx88[1]/0: found at 0000:00:07.0, rev: 5, irq: 185, latency: 32, mmio:
0xdc000000
cx88[1]/0: registered device video1 [v4l2]
cx88[1]/0: registered device vbi1
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 193
cx88[2]/0: found at 0000:00:08.0, rev: 5, irq: 193, latency: 32, mmio:
0xda000000
cx88[2]/0: registered device video2 [v4l2]
cx88[2]/0: registered device vbi2
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:11.5 to 64
cx2388x blackbird driver version 0.0.6 loaded
cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x290-0x297
0x400-0x40f 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: excluding 0x818-0x87f
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia0.0
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xe3
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xe3
Adding 1951888k swap on /dev/hda3.  Priority:-1 extents:1 across:1951888k
EXT3 FS on hda2, internal journal
orinoco 0.15 (David Gibson <hermes at gibson.dropbear.id.au>, Pavel Roskin
<proski at gnu.org>, et al)
orinoco_cs 0.15 (David Gibson <hermes at gibson.dropbear.id.au>, Pavel
Roskin <proski at gnu.org>, et al)
pcmcia: request for exclusive IRQ could not be fulfilled.
pcmcia: the driver needs updating to supported shared IRQ lines.
eth0: Hardware identity 0001:0001:0004:0002
eth0: Station identity  001f:0001:0008:000a
eth0: Firmware determined as Lucent/Agere 8.10
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:02:2D:31:29:A5
eth0: Station name "HERMES I"
eth0: ready
eth0: orinoco_cs at 0.0, irq 169, io 0x0100-0x013f
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel at redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
JFS: nTxBlock = 4039, nTxLock = 32313
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 15
eth0: Lucent/Agere firmware doesn't support manual roaming
eth0: New link status: Connected (0001)
ttyS0: LSR safety check engaged!
ttyS0: LSR safety check engaged!
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Warning: /proc/ide/hd?/settings interface is obsolete, and will be
removed soon!
eth0: no IPv6 routers present
Linux agpgart interface v0.101 (c) Dave Jones
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8774  Tue Aug  1
20:54:08 PDT 2006

---------------------------------------------------------------------
running "LiveTV" on mythtv (signal strength  ~93%)
 --------------------------------------------------------------------
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout







# lsmod
Module                  Size  Used by
esp4                    7872  2
nvidia               4550740  20
agpgart                29808  1 nvidia
ppdev                   9028  0
lp                     10820  0
ipv6                  224928  27
deflate                 3712  0
zlib_deflate           18008  1 deflate
zlib_inflate           14272  1 deflate
twofish                45888  0
serpent                17408  0
aes                    28032  0
blowfish                8832  2
des                    17216  0
sha256                 11136  0
sha1                    2688  0
crypto_null             2688  0
af_key                 31696  2
jfs                   164036  2
dm_snapshot            15580  0
dm_mirror              18896  0
dm_mod                 50808  9 dm_snapshot,dm_mirror
w83627hf               23184  0
hwmon_vid               2624  1 w83627hf
i2c_isa                 4992  1 w83627hf
usbmouse                5312  0
orinoco_cs             15556  1
orinoco                37396  1 orinoco_cs
hermes                  6976  2 orinoco_cs,orinoco
snd_seq_dummy           3716  0
snd_seq_oss            28864  0
snd_seq_midi            8256  0
snd_seq_midi_event      7040  2 snd_seq_oss,snd_seq_midi
snd_seq                45424  6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
via_ircc               23316  0
cx88_blackbird         16964  0
cx2341x                10244  1 cx88_blackbird
snd_via82xx            24788  0
snd_ac97_codec         82848  1 snd_via82xx
snd_ac97_bus            2240  1 snd_ac97_codec
snd_pcm_oss            39296  0
snd_mixer_oss          15424  1 snd_pcm_oss
snd_pcm                69768  3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer              21188  2 snd_seq,snd_pcm
snd_page_alloc          9608  2 snd_via82xx,snd_pcm
snd_mpu401_uart         7808  1 snd_via82xx
pcmcia                 26864  1 orinoco_cs
snd_rawmidi            23296  2 snd_seq_midi,snd_mpu401_uart
snd_seq_device          7692  5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
irda                  160700  1 via_ircc
evdev                   9024  0
cx88_dvb               13636  0
cx8802                 11588  2 cx88_blackbird,cx88_dvb
crc_ccitt               2112  1 irda
cx8800                 31372  1 cx88_blackbird
cx88xx                 58340  4 cx88_blackbird,cx88_dvb,cx8802,cx8800
ir_common              27716  1 cx88xx
snd                    48132  11
snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
cx88_vp3054_i2c         4288  1 cx88_dvb
i2c_algo_bit            8392  2 cx88xx,cx88_vp3054_i2c
mt352                   6212  1 cx88_dvb
dvb_pll                14276  1 cx88_dvb
or51132                 9348  1 cx88_dvb
video_buf_dvb           6276  1 cx88_dvb
dvb_core               72616  1 video_buf_dvb
nxt200x                12292  1 cx88_dvb
firmware_class          9792  4 cx88_blackbird,pcmcia,or51132,nxt200x
video_buf              23300  6
cx88_blackbird,cx88_dvb,cx8802,cx8800,cx88xx,video_buf_dvb
tveeprom               13776  1 cx88xx
ide_cd                 36384  0
compat_ioctl32          1344  1 cx8800
btcx_risc               4680  3 cx8802,cx8800,cx88xx
yenta_socket           24588  3
rsrc_nonstatic         11840  1 yenta_socket
pcmcia_core            36624  4
orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatic
isl6421                 2304  1 cx88_dvb
zl10353                 5124  1 cx88_dvb
cx24123                11272  1 cx88_dvb
lgdt330x                7644  1 cx88_dvb
cx22702                 5828  1 cx88_dvb
videodev               21376  3 cx88_blackbird,cx8800,cx88xx
v4l1_compat            12420  2 cx8800,videodev
v4l2_common            20352  4 cx88_blackbird,cx2341x,cx8800,videodev
pcspkr                  2816  0
i2c_core               20112  16
nvidia,w83627hf,i2c_isa,cx88_dvb,cx88xx,i2c_algo_bit,mt352,dvb_pll,or51132,nxt200x,tveeprom,isl6421,zl10353,cx24123,lgdt330x,cx22702
psmouse                34824  0
parport_pc             32036  1
parport                35336  3 ppdev,lp,parport_pc
cdrom                  32672  1 ide_cd
soundcore               9312  1 snd
uhci_hcd               21000  0
usbcore               112324  3 usbmouse,uhci_hcd
floppy                 52708  0
rtc                    12340  0
unix                   25520  293





More information about the linux-dvb mailing list