[linux-dvb] HVR4000 & DVB-S2 - What am I doing wrong ;-)

boppdvb at digestive.jpl.se boppdvb at digestive.jpl.se
Mon Dec 31 01:15:00 CET 2007


Hello!

I'm trying to get my HVR4000 working with DVB-S2 and VDR but tonight I 
think I have figured out that I have a problem with the driver or 
something as I cant get lock on a S2-channel with szap2 ...

This is what I've done:

Downloaded the latest hg from http://jusst.de/hg/multiproto

Patched it with this patch:
http://www.mail-archive.com/linux-dvb@linuxtv.org/msg28003/multiproto-hvr4k.patch.bz2

make all; make install

modprobe isl6421
modprobe cx24116
modprobe cx88-dvb

Then I downloaded a szap2 from somewhere on the net ;-)

radiokaka szap2 # ./szap2 -t 2 "SVT HD"
reading channels from file '/root/.szap/channels.conf'
zapping to 3 'SVT HD':
sat 1, frequency = 11421 MHz H, symbolrate 25000000, vpid = 0x0200, apid 
= 0x0280 sid = 0x0ed9 (fec = -2147483648, mod = 2)
Querying info .. Delivery system=DVB-S2
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
----------------------------------> Using 'Conexant CX24116/CX24118' 
DVB-S
diseqc: sat_no:1 pol_vert:0 hi_band:0 cmd:e0 10 38 f6 wait:0

do_tune: API version=2, delivery system = 2
do_tune: Frequency = 1671000, Srate = 25000000 (DVB-S2)
do_tune: Frequency = 1671000, Srate = 25000000 (SET_PARAMS)

status 01 | signal d1c0 | snr 0000 | ber 00000000 | unc 00000000 |

(it's on my second port on the Diseqc)

And this is my ~/.szap/channels.conf entry:
SVT HD:11421:h:1:25000:512:640:3801

dmesg gives the following output:
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
CORE cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 
DVB-S/S2/T/Hybrid [card=58,autodetected]
TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
tveeprom 2-0050: Hauppauge model 69009, rev B2D3, serial# 1705190
tveeprom 2-0050: MAC address is 00-0D-FE-1A-04-E6
tveeprom 2-0050: tuner model is Philips FMD1216MEX (idx 133, type 63)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) 
ATSC/DVB Digital (eeprom 0xf4)
tveeprom 2-0050: audio processor is CX882 (idx 33)
tveeprom 2-0050: decoder processor is CX882 (idx 25)
tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=69009
input: cx88 IR (Hauppauge WinTV-HVR400 as /class/input/input2
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
ACPI: PCI Interrupt 0000:04:08.2[A] -> Link [LNKA] -> GSI 18 (level, 
low) -> IRQ 18
cx88[0]/2: found at 0000:04:08.2, rev: 5, irq: 18, latency: 64, mmio: 
0xf8000000
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
CORE cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 
DVB-S/S2/T/Hybrid [card=58]
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0])
DVB: registering frontend 0 (Conexant CX24116/CX24118)...
cx24116_firmware_ondemand: Waiting for firmware upload 
(dvb-fe-cx24116.fw)...
cx24116_firmware_ondemand: Waiting for firmware upload(2)...
cx24116_load_firmware: FW version 1.20.79.0
cx24116_firmware_ondemand: Firmware upload complete
dvb_frontend_ioctl: DVBFE_GET_INFO
dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2

lsmod:
Module                  Size  Used by
lirc_mceusb2           12356  1
lirc_dev               13816  1 lirc_mceusb2
nvidia               8888772  36
cx88_dvb               16328  0
cx88_vp3054_i2c         4672  1 cx88_dvb
cx8802                 17860  1 cx88_dvb
cx88xx                 65124  2 cx88_dvb,cx8802
ir_common              33540  1 cx88xx
tveeprom               18448  1 cx88xx
videodev               27136  1 cx88xx
v4l2_common            19264  2 cx88xx,videodev
v4l1_compat            13188  1 videodev
btcx_risc               6088  2 cx8802,cx88xx
video_buf_dvb           7108  1 cx88_dvb
dvb_core               83824  1 video_buf_dvb
video_buf              23108  4 cx88_dvb,cx8802,cx88xx,video_buf_dvb
cx24116                16784  1
isl6421                 4096  1

I can get lock on all DVB-S channels using szap2 or szap

Is there anyone that sees what I'm doing wrong? I've been struggling 
with this for a few days and it would be great to get it working!

Thanks for any help!

Best regards Lars Fredriksson



More information about the linux-dvb mailing list