[linux-dvb] Hi, i have problem with my new pinnacle pctv hd pro stick

Jorge Cisneros jorgecis at gmail.com
Thu Jun 14 21:11:37 CEST 2007


Hi,

  I follow the messange in
http://www.mail-archive.com/em28xx@mcentral.de/msg00043.html, but  my card
is not working

  My system is gentoo 64 bits Intel pentium dual core
  Kernel 2.6.20
  The driver load with any error

Module
 em28xx                 92728  0
compat_ioctl32          8064  1 em28xx
ir_common              36100  1 em28xx
videodev               25856  1 em28xx
v4l2_common            17664  3 em28xx,compat_ioctl32,videodev
v4l1_compat            11524  2 em28xx,videodev
tveeprom               16656  1 em28xx


The syslog show
Jun 14 13:17:04 tux kernel: usb 1-7: new high speed USB device using
ehci_hcd an
d address 7
Jun 14 13:17:04 tux kernel: usb 1-7: configuration #1 chosen from 1 choice
Jun 14 13:17:04 tux kernel: em28xx new video device (2304:0227): interface
0, cl
ass 255
Jun 14 13:17:04 tux kernel: em28xx: device is attached to a USB 2.0 bus
Jun 14 13:17:04 tux kernel: em28xx: you're using the experimental/unstable
tree
from mcentral.de
Jun 14 13:17:04 tux kernel: em28xx: there's also a stable tree available but
whi
ch is limited to
Jun 14 13:17:04 tux kernel: em28xx: linux <=2.6.19.2
Jun 14 13:17:04 tux kernel: em28xx: it's fine to use this driver but keep in
min
Jun 14 13:17:04 tux kernel: em28xx: to
http://mcentral.de/hg/~mrec/v4l-dvb-kerne
l as soon as it's
Jun 14 13:17:04 tux kernel: em28xx: proved to be stable
Jun 14 13:17:04 tux kernel: em28xx #0: Alternate settings: 8
Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 0, max size= 0
Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 1, max size= 0
Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 2, max size= 1448
Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 3, max size= 2048
Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 4, max size= 2304
Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 5, max size= 2580
Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 6, max size= 2892
Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 7, max size= 3072
Jun 14 13:17:04 tux kernel: input: em2880/em2870 remote control as
/class/input/
input5
Jun 14 13:17:04 tux kernel: em28xx-input.c: remote control handler attached
Jun 14 13:17:04 tux kernel: attach_inform: eeprom detected.
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27
02 d0
 12 5c 03 8e 16 a4 1c
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01
00 00
 00 00 00 00 00 00 00

Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02
00 b8
 00 00 00 5b 1c 00 00
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02
20 01
 01 00 00 00 00 00 00
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00
00 00
 00 00 00 00 00 00 00
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00
00 00
 00 00 00 00 00 00 00
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00
00 00
 00 24 03 50 00 69 00
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63
00 6c
 00 65 00 20 00 53 00
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65
00 6d
 00 73 00 00 00 16 03
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56
00 20
 00 38 00 30 00 30 00
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30
00 37
 00 30 00 34 00 30 00
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom b0: 31 00 39 00 31 00 35
00 30
 00 30 00 35 00 00 00
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00
00 00
 00 00 00 00 00 00 00
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00
00 00
 00 00 00 00 00 00 00
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00
00 00
 00 00 00 00 00 00 00
Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00
00 00
 00 00 00 00 00 00 00
Jun 14 13:17:04 tux kernel: EEPROM ID= 0x9567eb1a
Jun 14 13:17:04 tux kernel: Vendor/Product ID= 2304:0227
Jun 14 13:17:04 tux kernel: AC97 audio (5 sample rates)
Jun 14 13:17:04 tux kernel: 500mA max power
Jun 14 13:17:04 tux kernel: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
Jun 14 13:17:04 tux kernel: em28xx #0: V4L2 device registered as /dev/video0
Jun 14 13:17:04 tux kernel: em28xx #0: Found Pinnacle PCTV HD Pro


The code of the driver is from hg clone http://mcentral.de/hg/~mrec/v4l-dvb
The firmware using is firmware_v4.tgz

134d3b77b40d1b1298a91bb32c44544cebf77e64  firmware_v4.tgz
xawtv -hwscan

This is xawtv-3.95, running on Linux/x86_64 (2.6.19-gentoo-r5)
looking for available devices
/dev/video0: OK                         [ -device /dev/video0 ]
    type : v4l2
    name : Pinnacle PCTV HD Pro
    flags:  capture tuner
This is xawtv-3.95, running on Linux/x86_64 (2.6.19-gentoo-r5)
WARNING: v4l-conf is compiled without DGA support.
/dev/video0 [v4l2]: no overlay support
v4l-conf had some trouble, trying to continue anyway
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to
type FontStruct
v4l2: oops: select timeout



 Any idea, the what is the problem.


but when i run the xawtv



the program xawtv show
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20070614/756b0a9f/attachment.htm 


More information about the linux-dvb mailing list