[linux-dvb] Hi, i have problem with my new pinnacle pctv hd pro stick

Markus Rechberger mrechberger at gmail.com
Thu Jun 14 22:32:39 CEST 2007


Hi Jorge,

On 6/14/07, Jorge Cisneros <jorgecis at gmail.com> wrote:
> Hi,
>
>   I follow the messange in
> http://www.mail-archive.com/em28xx@mcentral.de/msg00043.html, but  my card
> is not working
>
>   My system is gentoo 64 bits Intel pentium dual core
>   Kernel 2.6.20
>   The driver load with any error
>
> Module
>  em28xx                 92728  0
> compat_ioctl32          8064  1 em28xx
> ir_common              36100  1 em28xx
> videodev               25856  1 em28xx
> v4l2_common            17664  3 em28xx,compat_ioctl32,videodev
> v4l1_compat            11524  2 em28xx,videodev
> tveeprom               16656  1 em28xx
>
>
> The syslog show
> Jun 14 13:17:04 tux kernel: usb 1-7: new high speed USB device using
> ehci_hcd an
> d address 7
> Jun 14 13:17:04 tux kernel: usb 1-7: configuration #1 chosen from 1 choice
> Jun 14 13:17:04 tux kernel: em28xx new video device (2304:0227): interface
> 0, cl
> ass 255
> Jun 14 13:17:04 tux kernel: em28xx: device is attached to a USB 2.0 bus
> Jun 14 13:17:04 tux kernel: em28xx: you're using the experimental/unstable
> tree
> from mcentral.de
> Jun 14 13:17:04 tux kernel: em28xx: there's also a stable tree available but
> whi
> ch is limited to
> Jun 14 13:17:04 tux kernel: em28xx: linux <=2.6.19.2
> Jun 14 13:17:04 tux kernel: em28xx: it's fine to use this driver but keep in
> min
> Jun 14 13:17:04 tux kernel: em28xx: to
> http://mcentral.de/hg/~mrec/v4l-dvb-kerne
> l as soon as it's
> Jun 14 13:17:04 tux kernel: em28xx: proved to be stable
> Jun 14 13:17:04 tux kernel: em28xx #0: Alternate settings: 8
> Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 0, max size= 0
> Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 1, max size= 0
> Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 2, max size= 1448
> Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 3, max size= 2048
> Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 4, max size= 2304
> Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 5, max size= 2580
> Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 6, max size= 2892
> Jun 14 13:17:04 tux kernel: em28xx #0: Alternate setting 7, max size= 3072
> Jun 14 13:17:04 tux kernel: input: em2880/em2870 remote control as
> /class/input/
> input5
> Jun 14 13:17:04 tux kernel: em28xx-input.c: remote control handler attached
> Jun 14 13:17:04 tux kernel: attach_inform: eeprom detected.
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27
> 02 d0
>  12 5c 03 8e 16 a4 1c
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01
> 00 00
>  00 00 00 00 00 00 00
>
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02
> 00 b8
>  00 00 00 5b 1c 00 00
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02
> 20 01
>  01 00 00 00 00 00 00
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00
> 00 00
>  00 00 00 00 00 00 00
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00
> 00 00
>  00 00 00 00 00 00 00
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00
> 00 00
>  00 24 03 50 00 69 00
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63
> 00 6c
>  00 65 00 20 00 53 00
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65
> 00 6d
>  00 73 00 00 00 16 03
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56
> 00 20
>  00 38 00 30 00 30 00
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30
> 00 37
>  00 30 00 34 00 30 00
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom b0: 31 00 39 00 31 00 35
> 00 30
>  00 30 00 35 00 00 00
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00
> 00 00
>  00 00 00 00 00 00 00
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00
> 00 00
>  00 00 00 00 00 00 00
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00
> 00 00
>  00 00 00 00 00 00 00
> Jun 14 13:17:04 tux kernel: em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00
> 00 00
>  00 00 00 00 00 00 00
> Jun 14 13:17:04 tux kernel: EEPROM ID= 0x9567eb1a
> Jun 14 13:17:04 tux kernel: Vendor/Product ID= 2304:0227
> Jun 14 13:17:04 tux kernel: AC97 audio (5 sample rates)
> Jun 14 13:17:04 tux kernel: 500mA max power
> Jun 14 13:17:04 tux kernel: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
> Jun 14 13:17:04 tux kernel: em28xx #0: V4L2 device registered as /dev/video0
> Jun 14 13:17:04 tux kernel: em28xx #0: Found Pinnacle PCTV HD Pro
>
>

module autoloading is probably not enabled in your kernel.

Markus

> The code of the driver is from hg clone http://mcentral.de/hg/~mrec/v4l-dvb
> The firmware using is firmware_v4.tgz
>
> 134d3b77b40d1b1298a91bb32c44544cebf77e64  firmware_v4.tgz
> xawtv -hwscan
>
> This is xawtv-3.95, running on Linux/x86_64 (2.6.19-gentoo-r5)
> looking for available devices
> /dev/video0: OK                         [ -device /dev/video0 ]
>     type : v4l2
>     name : Pinnacle PCTV HD Pro
>     flags:  capture tuner
> This is xawtv-3.95, running on Linux/x86_64 (2.6.19-gentoo-r5)
> WARNING: v4l-conf is compiled without DGA support.
> /dev/video0 [v4l2]: no overlay support
> v4l-conf had some trouble, trying to continue anyway
> Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to
> type FontStruct
> v4l2: oops: select timeout
>
>
>
>  Any idea, the what is the problem.
>
>
> but when i run the xawtv
>
>
>
> the program xawtv show
>


-- 
Markus Rechberger



More information about the linux-dvb mailing list