[linux-dvb] HVR4000 Support

Darron Broad darron at kewl.org
Mon Mar 19 12:33:33 CET 2007


In message <20070318090737.GB7031 at gmail.com>, Gregoire Favre wrote:
>On Sun, Mar 18, 2007 at 01:25:11AM +0000, Darron Broad wrote:
>> In message <20070317221756.GB23903 at gmail.com>, Gregoire Favre wrote:
>>=20
>> hi.
>>=20
>> please apply the patch here:
>>=20
>> http://dev.kewl.org/tmp/hvr4000/stoth.diff
>>=20
>> and see if diseqc now works for you.
>
>I have one error less in trying to tune with szap :

hi

please try the latest diseqc patch at http://dev.kewl.org/tmp/hvr4000/stoth.diff

i made an assumption regarding an unknown variable in the diseqc
command and switching between two LNBs now works for me.

if you are still unable to tune to ALOTV? on your second LNB then some
other tests ought to be taken.

cheers

>sat 0, frequency =3D 10853 MHz H, symbolrate 27500000, vpid =3D 0x083d, a=
>pid =3D 0x083e sid =3D 0x21b4
>using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
>t: 1174208457.955, c: 1, r: 0, a: ---------------------------------------=
>-------
>t: 1174208457.955, c: 1, r: 0, a: ioctl(fd, FE_SET_TONE, SEC_TONE_OFF)
>t: 1174208457.979, c: 1, r: 0, a: ioctl(fd, FE_SET_VOLTAGE, v) (v =3D SEC=
>_VOLTAGE_18)
>t: 1174208457.998, c: 1, r: 0, a: ioctl(fd, FE_DISEQC_SEND_MASTER_CMD, &c=
>md->cmd)
>t: 1174208458.045, c: 1, r: -1, a: ioctl(fd, FE_DISEQC_SEND_BURST, b) (b =
>=3D SEC_MINI_A)
>FE_DISEQC_SEND_BURST failed: Operation not supported
>t: 1174208458.065, c: 1, r: 0, a: ioctl(fd, FE_SET_TONE, t) (t =3D SEC_TO=
>NE_OFF)
>t: 1174208458.073, c: 1, r: 0, a: ioctl(fefd, FE_SET_FRONTEND, &tuneto)
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 03 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 03 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 03 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 03 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>t: 1174208469.147, c: 1, r: 0, a: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~=
>~~~~~~~
>
>So only FE_DISEQC_SEND_BURST is missing right now (I use the special
>szap with extra log output from Reinhard Ni=DFl.)
>
>I say it's a major improvment :)
>
>Thank you very much,
>--=20
>Gr=E9goire FAVRE  http://gregoire.favre.googlepages.com  http://www.gnupg=
>.org
>

--

 // /
{:)==={ Darron Broad <darron at kewl.org>
 \\ \ 




More information about the linux-dvb mailing list