[linux-dvb] Lifeview Hybric PCI problems mainly with dvb-t

[scoop_yo at freemail.gr]

> I wonder whether the AGC configuration is fully correct.
> with the option -X w_scan produces a configuration format
> for tzap and xine. If you use this output, is the signal
> stable?
> Does your card have 2 antenna sockets?
> 
> Hartmut

Yes that w_scan option worked ! My card has 1 antenna socket for TV (1 more for radio antenna and 1multi for remote , sound , svideo etc..)

I run femon before I run xine and I get:

FE: Philips TDA10046H DVB-T (DVBT)
status       | signal  50% | snr  49% | ber 0001fffe | unc 00000000 |
status       | signal  50% | snr  49% | ber 0001fffe | unc 00000000 |
status       | signal  50% | snr  49% | ber 0001fffe | unc 00000000 |

..while I am running xine:
FE: Philips TDA10046H DVB-T (DVBT)
status SCVYL | signal  66% | snr  98% | ber 00001724 | unc ffffffff | FE_HAS_LOCK
status SCVYL | signal  66% | snr  98% | ber 0000169c | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal  66% | snr  98% | ber 000016ca | unc 00000000 | FE_HAS_LOCK


..after I close xine:
FE: Philips TDA10046H DVB-T (DVBT)
status   VY  | signal  50% | snr  49% | ber 000136dc | unc 00000000 |
status   VY  | signal  50% | snr  49% | ber 000136dc | unc 00000000 |
status   VY  | signal  50% | snr  49% | ber 000136dc | unc 00000000 |

If you want me to do any more tests regarding dvb-t, analog tv, radio , remote  please do not hesitate to contact me. :)
I'm also trying to find someone with a good camera get a shot of the card if that is helping in any way.

Thanks again.