[linux-dvb] Dazzle VideoCollector 2006 (Pinnacle 300i): module saa7134-dvb not loading

Hartmut Hackmann hartmut.hackmann at t-online.de
Mon Mar 26 23:35:23 CEST 2007


Hi,

Sergi Castaño Elias schrieb:
>    Hi all,
> 
>   Recently I've reinstalled my system with gentoo 2006.1 with kernel
> version 2.6.19-gentoo-r5 using v4l-dvb installed following the link
> CVS/Mercurial at linuxtv.org.
> 
>    When I try to load dvb module (saa7134-dvb) I get:
> 
> genpkt v4l-dvb # modprobe saa7134-dvb
> FATAL: Error inserting saa7134_dvb
> (/lib/modules/2.6.19-gentoo-r5/v4l-dvb/video/saa7134/saa7134-dvb.ko):
> Unknown symbol in module, or unknown parameter (see dmesg)
> 
>    Looking at dmesg output:
> 
> Linux video capture interface: v2.00
> saa7130/34: v4l2 driver version 0.2.14 loaded
> saa7134[0]: found at 0000:01:09.0, rev: 1, irq: 21, latency: 32, mmio:
> 0xe1001000
> saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T +
> PAL [card=50,autodetected]
> saa7134[0]: board init: gpio is c80e000
> saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 1e 54 5e ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 70: 00 30 8d 18 b2 ad ff ff 74 7c ff ff ff ff ff ff
> tuner 0-0043: chip found @ 0x86 (saa7134[0])
> tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
> tuner 0-0060: Chip ID is not zero. It is not a TEA5767
> tuner 0-0060: chip found @ 0xc0 (saa7134[0])
> tuner 0-0060: microtune: companycode=3cbf part=42 rev=22
> tuner 0-0060: microtune MT2050 found, OK
> tuner 0-0060: microtune: companycode=3cbf part=42 rev=22
> tuner 0-0060: microtune MT2050 found, OK
> saa7134[0]: registered device video0 [v4l2]
> saa7134[0]: registered device vbi0
> saa7134_dvb: disagrees about version of symbol dvb_pll_tdhu2
> saa7134_dvb: Unknown symbol dvb_pll_tdhu2
> saa7134_dvb: disagrees about version of symbol dvb_pll_philips_td1316
> saa7134_dvb: Unknown symbol dvb_pll_philips_td1316
> saa7134_dvb: disagrees about version of symbol dvb_pll_tuv1236d
> saa7134_dvb: Unknown symbol dvb_pll_tuv1236d
> saa7134_dvb: disagrees about version of symbol tda10046_attach
> saa7134_dvb: Unknown symbol tda10046_attach
> saa7134_dvb: disagrees about version of symbol dvb_pll_configure
> saa7134_dvb: Unknown symbol dvb_pll_configure
> saa7134_dvb: disagrees about version of symbol dvb_pll_tdhu2
> saa7134_dvb: Unknown symbol dvb_pll_tdhu2
> saa7134_dvb: disagrees about version of symbol dvb_pll_philips_td1316
> saa7134_dvb: Unknown symbol dvb_pll_philips_td1316
> saa7134_dvb: disagrees about version of symbol dvb_pll_tuv1236d
> saa7134_dvb: Unknown symbol dvb_pll_tuv1236d
> saa7134_dvb: disagrees about version of symbol tda10046_attach
> saa7134_dvb: Unknown symbol tda10046_attach
> saa7134_dvb: disagrees about version of symbol dvb_pll_configure
> saa7134_dvb: Unknown symbol dvb_pll_configure
> 
>    I don't know what I have done wrong. Perhaps missing dvb support at
> kernel?
> 
>    Thanks everyone and sorry my poor english.
> 
This occurs when you have a mixture of old- and new kernel modules.
before you load the new modules after make install, you need to
either do
make rmmod
or reboot the system.

Good luck
  Hartmut



More information about the linux-dvb mailing list