[linux-dvb] xc3028 tuner development status?

[Michael Krufky]

On Nov 13, 2007 11:16 AM, aldebaran <aldebx at yahoo.fr> wrote:
>
>  I thank you very much for your quick reply Michel, Markus and Mauro!!

[snip]

>  [  789.484000] cx23885 driver version 0.0.1 loaded
>  [  789.484000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low)
> -> IRQ 17
>  [  789.484000] CORE cx23885[0]: subsystem: 0070:7717, board: Hauppauge
> WinTV-HVR1800lp [card=1,insmod option]
>  [  789.584000] cx23885[0]: i2c bus 0 registered
>  [  789.584000] cx23885[0]: i2c bus 1 registered
>  [  789.584000] cx23885[0]: i2c bus 2 registered
>  [  789.612000] tveeprom 0-0050: Hauppauge model 77001, rev D4C0, serial#
> 2335707
>  [  789.612000] tveeprom 0-0050: MAC address is 00-0D-FE-23-A3-DB
>  [  789.612000] tveeprom 0-0050: tuner model is Xceive XC3028 (idx 120, type
> 71)
>  [  789.612000] tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital
> (eeprom 0x88)
>  [  789.612000] tveeprom 0-0050: audio processor is CX23885 (idx 39)
>  [  789.612000] tveeprom 0-0050: decoder processor is CX23885 (idx 33)
>  [  789.612000] tveeprom 0-0050: has no radio, has no IR receiver, has no IR
> transmitter
>  [  789.612000] cx23885[0]: hauppauge eeprom: model=77001
>  [  789.612000] cx23885[0]: cx23885 based dvb card
>  [  789.624000] cx23885[0]: frontend initialization failed
>  [  789.624000] cx23885_dvb_register() dvb_register failed err = -1
>  [  789.624000] cx23885_dev_setup() Failed to register dvb adapters on VID_C
>  [  789.624000] cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 17,
> latency: 0, mmio: 0xf4000000
>  [  789.624000] PCI: Setting latency timer of device 0000:04:00.0 to 64

Don't worry about this -- Steve's got it covered:

http://linuxtv.org/pipermail/linux-dvb/2007-November/021863.html

-mike