[linux-dvb] Twinhan 1034 question

Michel Verbraak michel at verbraak.org
Mon Sep 3 07:45:55 CEST 2007


Abylai Ospan schreef:
> В Вск, 02/09/2007 в 19:53 +0200, Michel Verbraak пишет:
>> Abylai Ospan schreef:
>>> Hello !
>>>
>>> I have gentoo linux with kernel.org stock kernel 2.6.20 and I have 
>>> compiled and installed v4l source from 
>>> http://jusst.de/manu/mantis-v4l-dvb.tar.bz2 
>>> <http://jusst.de/manu/mantis-v4l-dvb.tar.bz2>  dated 01-Apr-2007 
>>> 17:46  4.8M.
>>>
>>> After 'modprobe mantis' I'v see in dmesg:
>>>
>>> ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 23 (level, low) -> IRQ 19
>>> irq: 19, latency: 32
>>> memory: 0xfbfff000, mmio: 0xf8826000
>>> found a VP-1034 PCI DVB-S/DSS device on (02:03.0),
>>>     Mantis Rev 1 [1822:0014], irq: 19, latency: 32
>>>     memory: 0xfbfff000, mmio: 0xf8826000
>>>     MAC Address=[00:08:ca:1a:a3:68]
>>> mantis_alloc_buffers (0): DMA=0x301f0000 cpu=0xf01f0000 size=65536
>>> mantis_alloc_buffers (0): RISC=0x377af000 cpu=0xf77af000 size=1000
>>> DVB: registering new adapter (Mantis dvb adapter).
>>> mantis_frontend_init (0): Probing for MB86A16 (DVB-S/DSS)
>>> mantis_frontend_init (0): found MB86A16 DVB-S/DSS frontend @0x08
>>> DVB: registering frontend 0 (Fujitsu MB86A16 DVB-S)...
>>>
>>> and /dev/dvb/adapter0/ tree is created. It's looks like card 
>>> correctly detected.
>>> But I don't see /dev/dvb/adapter0/ca0 for CI module. Is this driver 
>>> supports Twinhan 1034 CI interface ?
>>> May be some repository with newer version is available ?
>>> Thanks !
>>>
>>> -- 
>>> Abylai Ospan <aospan at netup.ru <mailto:aospan at netup.ru>>
>>> NetUP Inc.
>>>
>>> ------------------------------------------------------------------------
>>>
>>>
>>>
>>> _______________________________________________
>>> linux-dvb mailing list
>>> linux-dvb at linuxtv.org <mailto:linux-dvb at linuxtv.org>
>>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>>       
>> Currently not in the supplied open source drivers. There is a binary 
>> package at the Twinhan (download page) website which does support the 
>> CI but the modules were compiled for the first Fedore Core 6 kernel 
>> on a i586 platform.
> Ok, thanks. But this module can't loading under linux kernel 2.6.20 
> (as expected):
> insmod: error inserting 'linuxdriver/v4l/mantis.ko': -1 Invalid module 
> format
> mantis: version magic '2.6.18-1.2798.fc6 SMP mod_unload 686 REGPARM 
> 4KSTACKS gcc-4.1' should be '2.6.20 SMP mod_unload PENTIUM4 '
>
> Do you know how to "force" load this module ? May be some way to 
> change "magic" string for matching ? I don't want to install FC6 ... :)
> Thanks!
>
> -- 
> Abylai Ospan <aospan at netup.ru <mailto:aospan at netup.ru>>
> NetUP Inc.
>
You could try a 'modprobe --force mantis'. But hte other modules neede 
should be that of the binary package and should also be loade with the 
--force option.

Regards,

Michel.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20070903/3763d869/attachment.htm 


More information about the linux-dvb mailing list