[linux-dvb] DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2) - Remote Control Key Mapping

Kemble Wagner oobe.trouble at gmail.com
Thu Dec 18 03:33:30 CET 2008


please look at and read carefully these to posts

http://ubuntuforums.org/showthread.php?t=616103

and

http://ubuntuforums.org/showpost.php?p=6232229&postcount=42

On Tue, Dec 16, 2008 at 6:36 PM, drappa <drappa at iinet.net.au> wrote:

> Hello
>
> I installed a DVICO Dual digital 4 revision2 DVB-T card in a Mythbuntu 8.10
> system
>
> The card wasn't originally detected so I built the driver from the current
> v4l-dvb tree and it works great.
> Only problem is the included DVICO remote control has very limited
> functionality. Apart from the numeric keypad only three keys work.
>
> DMESG is below.
>
> Any pointers to getting the proper key mapping, please?
>
> Ta
> D
>
> [   13.921567] dvb-usb: found a ' in warm state.
> [   13.921802] dvb-usb: will pass the complete MPEG2 transport stream to
> the
> software demuxer.
> [   13.952919] DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual
> Digital 4 (rev 2))
> [   13.994729] input: PC Speaker as /devices/platform/pcspkr/input/input4
> [   14.117557] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
> [   14.120807] Linux agpgart interface v0.103
> [   14.275066] DiB0070: successfully identified
> [   14.275641] input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:08.0/0000:01:08.2/usb5/5-1/input/input5
> [   14.304726] dvb-usb: schedule remote query interval to 100 msecs.
> [   14.304733] dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)
> successfully initialized and connected.
> [   14.304750] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4 (rev
> 2)' in warm state.
> [   14.304877] dvb-usb: will pass the complete MPEG2 transport stream to
> the
> software demuxer.
> [   14.335977] DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual
> Digital 4 (rev 2))
> [   14.355636] nvidia: module license 'NVIDIA' taints kernel.
> [   14.497865] DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
> [   14.611161] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
> [   14.611169] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 20
> (level, low) -> IRQ 20
> [   14.611175] nvidia 0000:02:00.0: setting latency timer to 64
> [   14.611408] NVRM: loading NVIDIA UNIX x86 Kernel Module  177.80  Wed Oct
> 1 14:38:10 PDT 2008
> [   14.655134] DiB0070: successfully identified
> [   14.655812] input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:08.0/0000:01:08.2/usb5/5-2/input/input6
> [   14.680687] dvb-usb: schedule remote query interval to 100 msecs.
> [   14.680693] dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)
> successfully initialized and connected.
> [   14.680723] usbcore: registered new interface driver dvb_usb_cxusb
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20081218/5cdc1e07/attachment.htm 


More information about the linux-dvb mailing list