[linux-dvb] DVICO dual express incorrect readback of firmware message (2.6.28 kernel)

Devin Heitmueller devin.heitmueller at gmail.com
Wed Dec 31 03:58:24 CET 2008


On Tue, Dec 30, 2008 at 9:55 PM, sonofzev at iinet.net.au
<sonofzev at iinet.net.au> wrote:
> Upgrade to latest hg...
>
> Issue is still occurring.
>
> I also noticed some other messages in dmesg that I didn't see before that
> hopefully may help.
>
> cheers
> Allan
>
> Here is the output..
>
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> zl10353: write to reg 5f failed (err = -5)!
> zl10353: write to reg 71 failed (err = -5)!
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 4)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> zl10353: write to reg 5f failed (err = -5)!
> zl10353: write to reg 71 failed (err = -5)!
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> zl10353_read_register: readreg error (reg=6, ret==-5)
> zl10353: write to reg 55 failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg 56 failed (err = -5)!
> zl10353: write to reg 5e failed (err = -5)!
> zl10353: write to reg 5c failed (err = -5)!
> zl10353: write to reg 64 failed (err = -5)!
> zl10353: write to reg cc failed (err = -5)!
> zl10353: write to reg 65 failed (err = -5)!
> zl10353: write to reg 66 failed (err = -5)!
> zl10353: write to reg 6c failed (err = -5)!
> zl10353: write to reg 6d failed (err = -5)!
> zl10353: write to reg 6e failed (err = -5)!
> zl10353: write to reg 6f failed (err = -5)!
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> zl10353: write to reg 5f failed (err = -5)!
> zl10353: write to reg 71 failed (err = -5)!
> zl10353_read_register: readreg error (reg=6, ret==-5)
> zl10353: write to reg 55 failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 4-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 4)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> zl10353: write to reg 5f failed (err = -5)!
> zl10353: write to reg 71 failed (err = -5)!
> zl10353_read_register: readreg error (reg=6, ret==-5)
> zl10353: write to reg 55 failed (err = -5)!
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg 56 failed (err = -5)!
> zl10353: write to reg 5e failed (err = -5)!
> zl10353: write to reg 5c failed (err = -5)!
> zl10353: write to reg 64 failed (err = -5)!
> zl10353: write to reg cc failed (err = -5)!
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> zl10353: write to reg 65 failed (err = -5)!
> zl10353: write to reg 66 failed (err = -5)!
> zl10353: write to reg 6c failed (err = -5)!
> zl10353: write to reg 6d failed (err = -5)!
> zl10353: write to reg 6e failed (err = -5)!
> zl10353: write to reg 6f failed (err = -5)!
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> zl10353: write to reg 5f failed (err = -5)!
> zl10353: write to reg 71 failed (err = -5)!
> zl10353_read_register: readreg error (reg=6, ret==-5)
> zl10353: write to reg 55 failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg 56 failed (err = -5)!
> zl10353: write to reg 5e failed (err = -5)!
> zl10353: write to reg 5c failed (err = -5)!
> zl10353: write to reg 64 failed (err = -5)!
> zl10353: write to reg cc failed (err = -5)!
> zl10353: write to reg 65 failed (err = -5)!
> zl10353: write to reg 66 failed (err = -5)!
> zl10353: write to reg 6c failed (err = -5)!
> zl10353: write to reg 6d failed (err = -5)!
> zl10353: write to reg 6e failed (err = -5)!
> zl10353: write to reg 6f failed (err = -5)!
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 4-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 4-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 4)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> zl10353: write to reg 5f failed (err = -5)!
> zl10353: write to reg 71 failed (err = -5)!
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 4-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 4-0061: Incorrect readback of firmware version.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.

Do me a favor and please stop top posting.  It's a violation of list policy.

Were those there before you upgraded to the latest hg?

I suspect that perhaps the components are powered down, which is why
the i2c calls are failing.  Very strange.

-- 
Devin J. Heitmueller
http://www.devinheitmueller.com
AIM: devinheitmueller



More information about the linux-dvb mailing list