[linux-dvb] Nova-S-Plus Locking Issues

Dark Dragon darkdrgn2k at gmail.com
Fri Jan 4 15:06:54 CET 2008


No its to much of a pattern.

it WILL lock in 2.6.18 but NOT in 2.6.22 or 2.6.24 or HG Drivers.


On 1/4/08, Dwaine Garden <dwainegarden at rogers.com> wrote:
>
> Solar Storm???   8*)
>
>
>
> *Dark Dragon <darkdrgn2k at gmail.com>* wrote:
>
>
>
> Problem is i can no longer ESTABLISH a lock at all.  It simply stays at
> status 01!
>
> I know ther ewere some Voltage problems with the cards, but it will not
> lock H or V at all.  Any way to what is going on?!?!!?
>
>
>  On 1/4/08, Dwaine Garden <dwainegarden at rogers.com > wrote:
> >
> > I'm getting the same results.  Working on the digiwave 108g card.  So I
> > bought another card the Digiwave 103g.   The existing 103g which has been in
> > the kernel for a while, is getting the same problem that you are
> > experiencing.  It keeps losing the lock while scanning for channels.
> >
> > Must be a patch that was pushed to the kernel v4l/dvb tree.  Been
> > smashing my head against the wall (4 days) until about an hour ago when I
> > started playing around with the 103g card and getting the same issue.
> >
> > I'm running knoppmyth with kernel 2.6.18 with v4l/dvb updates from the
> > 2.6.22 kernel.  The other box is running 2.6.24-0.123.rc6.fc9 with today
> > v4l/dvb tree from HG.
> >
> > Finds the satellites, locks, scan loses lock.
> >
> > *Dark Dragon <darkdrgn2k at gmail.com>* wrote:
> >
> >  I have been fiddling with this set up for some time.
> > I have a Nova-S-Plus in a P4 1.7 running Fedora Core 6
> >
> > When i first got it running everythign worked great.  Tried it with 1
> > lnb. Got Good Signal, Good Locks and channels Scanned.
> > The kernel that comes with Fedora Core 6 is 2.6.18-1.2798
> >
> > Apperntly there are problems with diseqc, so i decided before moving to
> > a deseqc i shouls try upgradeing the kernel.
> > I tried pulling linux tv hg but it would not compile under that kernel.
> >
> > I updated to kernel 2.6.20-1.2948 from the repositories. I noticed after
> > this kernel was loaded that my card would no longer lock. I saw that the
> > Signal had fallen, previously grater then ff00 now at 6800 and less.Ialso noticed the quality was irratic.
> > When downgrading to 2.6.18 i found the card would once again lock.
> >
> > Fianlly i tried upgrading and pulling the latest HG drivers, but found
> > myself in the same position.  Can some one please shine some light on this.
> >
> > DMESG:
> > Linux video capture interface: v2.00
> > cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
> > cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S
> > [card=37,autodetected]
> > cx88[0]: TV tuner type 4, Radio tuner type -1
> > cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
> > tveeprom 1-0050: Hauppauge model 92001, rev B1B1, serial# 295008
> > tveeprom 1-0050: MAC address is 00-0D-FE-04-80-60
> > tveeprom 1-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
> > tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
> > tveeprom 1-0050: audio processor is CX883 (idx 32)
> > tveeprom 1-0050: decoder processor is CX883 (idx 22)
> > tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter
> > cx88[0]: hauppauge eeprom: model=92001
> > input: cx88 IR (Hauppauge Nova-S-Plus  as /class/input/input3
> > cx88[0]/2: cx2388x 8802 Driver Manager
> > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
> > PCI: setting IRQ 10 as level-triggered
> > ACPI: PCI Interrupt 0000:00:09.2[A] -> Link [LNKB] -> GSI 10 (level,
> > low) -> IRQ 10
> > cx88[0]/2: found at 0000:00:09.2, rev: 5, irq: 10, latency: 32, mmio:
> > 0xe3000000
> > ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 10 (level,
> > low) -> IRQ 10
> > cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 10, latency: 32, mmio:
> > 0xe5000000
> > cx88[0]/0: registered device video0 [v4l2]
> > cx88[0]/0: registered device vbi0
> > cx88/2: cx2388x dvb driver version 0.0.6 loaded
> > cx88/2: registering cx8802 driver, type: dvb access: shared
> > cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S
> > [card=37]
> > cx88[0]/2: cx2388x based DVB/ATSC card
> > DVB: registering new adapter (cx88[0])
> > DVB: registering frontend 0 (Conexant CX24123/CX24109)...
> >
> > LSPCI:
> >  00:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
> > and Audio Decoder (rev 05)
> >         Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S
> >         Flags: bus master, medium devsel, latency 32, IRQ 10
> >         Memory at e5000000 (32-bit, non-prefetchable) [size=16M]
> >         Capabilities: [44] Vital Product Data
> >         Capabilities: [4c] Power Management version 2
> > 00:09.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
> > Audio Decoder [Audio Port] (rev 05)
> >         Subsystem: Hauppauge computer works Inc. Unknown device 9202
> >         Flags: bus master, medium devsel, latency 32, IRQ 10
> >         Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
> >         Capabilities: [4c] Power Management version 2
> > 00:09.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
> > Audio Decoder [MPEG Port] (rev 05)
> >         Subsystem: Hauppauge computer works Inc. Unknown device 9202
> >         Flags: bus master, medium devsel, latency 32, IRQ 10
> >         Memory at e3000000 (32-bit, non-prefetchable) [size=16M]
> >         Capabilities: [4c] Power Management version 2
> > 00:09.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
> > Audio Decoder [IR Port] (rev 05)
> >         Subsystem: Hauppauge computer works Inc. Unknown device 9202
> >         Flags: bus master, medium devsel, latency 32, IRQ 10
> >         Memory at e2000000 (32-bit, non-prefetchable) [size=16M]
> >         Capabilities: [4c] Power Management version 2
> >
> >
> > SZAP ATTEMPT
> > [root at localhost szap]# ./szap -l DBS CHAN01
> > reading channels from file '/root/.szap/channels.conf'
> > zapping to 151 'CHAN01':
> > sat 0, frequency = 12442 MHz H, symbolrate 20000000, vpid = 0x1321, apid
> > = 0x1322
> > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> > status 01 | signal 6800 | snr a2c2 | ber 00000000 | unc fffffffe |
> > status 01 | signal 5b00 | snr a2dc | ber 00000000 | unc fffffffe |
> > status 01 | signal 5b00 | snr a284 | ber 00000000 | unc fffffffe |
> > status 01 | signal 5b00 | snr a3c0 | ber 00000000 | unc fffffffe |
> >
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb at linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >
> >
> >
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080104/cee521e8/attachment.htm 


More information about the linux-dvb mailing list