[linux-dvb] Diseqc and TT 3200-S2

Marco Coli marco.coli at hicad-dsc.it
Fri Jan 4 15:10:51 CET 2008


Manu Abraham ha scritto:
> Marco Coli wrote:
>   
>> I think this can be a quick workaround in this situation also. I need to
>> examine budget-ci.c only?
>>     
>
> Yes
>   
So I did... Now, after the correct modeprobing of modules in correct 
order ( stb6100,stb0899,lnbp21,budget_ci), I finally see adapter0 and 
adapter1 under /dev/dvb. But dmesg doesn't look good for the DVB-S2 
card, complaining about frontend driver not found (the CI interface is 
attached to the dvb card).... Did I miss something obvious?

DVB: registering new adapter (TT-Budget/S-1500 PCI)
adapter has MAC addr = 00:d0:5c:07:99:a2
input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input8
budget_ci: CI interface initialised
DVB: registering frontend 0 (ST STV0299 DVB-S)...
ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 22 (level, low) -> IRQ 22
saa7146: found saa7146 @ mem ffffc20000ad4000 (revision 1, irq 22) 
(0x5b2f,0x1081).
saa7146 (1): dma buffer size 192512
DVB: registering new adapter (TT-Budget S2-3200 PCI)
adapter has MAC addr = 00:d0:5c:0b:4d:f0
input: Budget-CI dvb ir receiver saa7146 (1) as /class/input/input9
budget-ci: A frontend driver was not found for device 1131/7146 
subsystem 5b2f/1081

> Most vendors do Write protect the EEPROM's because of this. Overwritten 
> EEPROM's can be due to various reasons.
>
>   
[...]

thank you for the infos... I'll discover in the near future if this 
EEPROM is protected or not

Marco Coli



More information about the linux-dvb mailing list