[linux-dvb] Diseqc and TT 3200-S2

[Brougs78]

Reinhard Nissl schrieb:
> Hi,
>
> Brougs78 schrieb:
>
>> Should diseqc allready work with the current multiproto-driver?
>>
>> I've got a multiswitch where 2 satellites are attached to it. It seems 
>> that I don't get a lock with the TT 3200.
>>
>> This is the only thing I'm really missing right now. Everething else is 
>> working really well with that card. Thanks to the driver developers out 
>> there.
>
> I've been using DiSEqC all the time with this card and VDR to
> control my multiswitch for ASTRA 19.2 E and Hotbird 13.0 E.
Hi Reinhard!

Could you please attach your diseqc.conf?

My recent config worked well with a DVB-s budget-card but it seems that 
it doesn't with the TT 3200:

S13.0E 11700 V  9750 t v W15 [E0 10 38 F4] W1 [E1 10 38 F4] W1 [E1 10 38 
F4] W15 [E0 31 6B 01] W1 [E1 31 6B 01] W1 [E1 31 6B 01] W15 t
S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W1 [E1 10 38 F5] W1 [E1 10 38 
F5] W15 [E0 31 6B 01] W1 [E1 31 6B 01] W1 [E1 31 6B 01] W15 T
S13.0E 11700 H  9750 t V W15 [E0 10 38 F6] W1 [E1 10 38 F6] W1 [E1 10 38 
F6] W15 [E0 31 6B 01] W1 [E1 31 6B 01] W1 [E1 31 6B 01] W15 t
S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W1 [E1 10 38 F7] W1 [E1 10 38 
F7] W15 [E0 31 6B 01] W1 [E1 31 6B 01] W1 [E1 31 6B 01] W15 T

S19.2E 11700 V  9750 t v W15 [E0 10 38 F0] W5 [E1 10 38 F0] W5 [E1 10 38 
F0] W15 [E0 31 6B 02] W1 [E1 31 6B 02] W1 [E1 31 6B 02] W15 t
S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W5 [E1 10 38 F1] W5 [E1 10 38 
F1] W15 [E0 31 6B 02] W1 [E1 31 6B 02] W1 [E1 31 6B 02] W15 T
S19.2E 11700 H  9750 t V W15 [E0 10 38 F2] W5 [E1 10 38 F2] W5 [E1 10 38 
F2] W15 [E0 31 6B 02] W1 [E1 31 6B 02] W1 [E1 31 6B 02] W15 t
S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W5 [E1 10 38 F3] W5 [E1 10 38 
F3] W15 [E0 31 6B 02] W1 [E1 31 6B 02] W1 [E1 31 6B 02] W15 T

I think the problem here could be, that on the first card (FF-card) i 
have a rotor and on the second card a regular diseqc-switch with a dish 
with 2 lnb's. And the diseqc.conf has to work with both setups.

But I will try to simplify the diseqc.conf and see if it works.