[linux-dvb] Diseqc and TT 3200-S2

Brougs78 brougs78 at gmx.net
Sat Jan 5 14:47:07 CET 2008


Brougs78 schrieb:
> Reinhard Nissl schrieb:
>> Hi,
>>
>> Brougs78 schrieb:
>>
>>> Should diseqc allready work with the current multiproto-driver?
>>>
>>> I've got a multiswitch where 2 satellites are attached to it. It seems 
>>> that I don't get a lock with the TT 3200.
>>>
>>> This is the only thing I'm really missing right now. Everething else is 
>>> working really well with that card. Thanks to the driver developers out 
>>> there.
>> I've been using DiSEqC all the time with this card and VDR to
>> control my multiswitch for ASTRA 19.2 E and Hotbird 13.0 E.
> Hi Reinhard!
>
> Could you please attach your diseqc.conf?
>
> My recent config worked well with a DVB-s budget-card but it seems that 
> it doesn't with the TT 3200:
>
> S13.0E 11700 V  9750 t v W15 [E0 10 38 F4] W1 [E1 10 38 F4] W1 [E1 10 38 
> F4] W15 [E0 31 6B 01] W1 [E1 31 6B 01] W1 [E1 31 6B 01] W15 t
> S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W1 [E1 10 38 F5] W1 [E1 10 38 
> F5] W15 [E0 31 6B 01] W1 [E1 31 6B 01] W1 [E1 31 6B 01] W15 T
> S13.0E 11700 H  9750 t V W15 [E0 10 38 F6] W1 [E1 10 38 F6] W1 [E1 10 38 
> F6] W15 [E0 31 6B 01] W1 [E1 31 6B 01] W1 [E1 31 6B 01] W15 t
> S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W1 [E1 10 38 F7] W1 [E1 10 38 
> F7] W15 [E0 31 6B 01] W1 [E1 31 6B 01] W1 [E1 31 6B 01] W15 T
>
> S19.2E 11700 V  9750 t v W15 [E0 10 38 F0] W5 [E1 10 38 F0] W5 [E1 10 38 
> F0] W15 [E0 31 6B 02] W1 [E1 31 6B 02] W1 [E1 31 6B 02] W15 t
> S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W5 [E1 10 38 F1] W5 [E1 10 38 
> F1] W15 [E0 31 6B 02] W1 [E1 31 6B 02] W1 [E1 31 6B 02] W15 T
> S19.2E 11700 H  9750 t V W15 [E0 10 38 F2] W5 [E1 10 38 F2] W5 [E1 10 38 
> F2] W15 [E0 31 6B 02] W1 [E1 31 6B 02] W1 [E1 31 6B 02] W15 t
> S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W5 [E1 10 38 F3] W5 [E1 10 38 
> F3] W15 [E0 31 6B 02] W1 [E1 31 6B 02] W1 [E1 31 6B 02] W15 T
>
> I think the problem here could be, that on the first card (FF-card) i 
> have a rotor and on the second card a regular diseqc-switch with a dish 
> with 2 lnb's. And the diseqc.conf has to work with both setups.
>
> But I will try to simplify the diseqc.conf and see if it works.
Ok, I tried the "default" diseqc.conf which i found in the german 
vdr-wiki and it works as expectet. I'm not using the rotor anyways so 
there is no reason to keep the old config:

S19.2E  11700 V  9750  t v W15 [E0 10 38 F0] W15 A W15 t
S19.2E  99999 V 10600  t v W15 [E0 10 38 F1] W15 A W15 T
S19.2E  11700 H  9750  t V W15 [E0 10 38 F2] W15 A W15 t
S19.2E  99999 H 10600  t V W15 [E0 10 38 F3] W15 A W15 T

S13.0E  11700 V  9750  t v W15 [E0 10 38 F4] W15 B W15 t
S13.0E  99999 V 10600  t v W15 [E0 10 38 F5] W15 B W15 T
S13.0E  11700 H  9750  t V W15 [E0 10 38 F6] W15 B W15 t
S13.0E  99999 H 10600  t V W15 [E0 10 38 F7] W15 B W15 T




More information about the linux-dvb mailing list