[linux-dvb] Problems with MSI Digivox Duo DVB-T USB, Ubuntu 8.04

tom thomas at ickes-home.de
Sat Jul 19 14:13:54 CEST 2008


results of lsmod | grep dvb:

dvb_usb_af9015         24332  0 
dvb_usb                22924  1 dvb_usb_af9015
dvb_core               80636  1 dvb_usb
i2c_core               24832  4 mxl5005s,af9013,dvb_usb_af9015,dvb_usb
usbcore               146028
6 dvb_usb_af9015,dvb_usb,usbhid,ehci_hcd,ohci_hcd

Thomas


Am Samstag, den 19.07.2008, 10:58 +0200 schrieb tom:
> Hi Antti,
> I have installed the driver. After reboot dmesg gives the following.
> 
> dmesg | grep dvb:
> 
> [ 1387.281913] dvb-usb: MSI DIGIVOX Duo successfully deinitialized and
> disconnected.
> [ 1397.029836] dvb-usb: found a 'MSI DIGIVOX Duo' in cold state, will
> try to load a firmware
> [ 1397.062503] dvb-usb: downloading firmware from file
> 'dvb-usb-af9015.fw'
> [  760.590855] dvb-usb: generic DVB-USB module successfully
> deinitialized and disconnected.
> [ 1397.796493] dvb-usb: found a 'MSI DIGIVOX Duo' in warm state.
> [ 1397.796602] dvb-usb: will pass the complete MPEG2 transport stream to
> the software demuxer.
> [ 1398.548360] dvb-usb: will pass the complete MPEG2 transport stream to
> the software demuxer.
> [ 1399.517422] dvb-usb: MSI DIGIVOX Duo successfully initialized and
> connected.
> [ 1510.506232] dvb-usb: could not handle pid_parser
> [ 1532.502328] dvb-usb: could not handle pid_parser
> [ 1555.125203] dvb-usb: could not handle pid_parser
> [ 1577.464244] dvb-usb: could not handle pid_parser
> [ 1600.496149] dvb-usb: could not handle pid_parser
> [ 1622.496391] dvb-usb: could not handle pid_parser
> [ 2324.836824] dvb-usb: could not handle pid_parser
> [ 2347.650720] dvb-usb: could not handle pid_parser
> [ 2371.133792] dvb-usb: could not handle pid_parser
> [ 2393.752616] dvb-usb: could not handle pid_parser
> [ 2415.895728] dvb-usb: could not handle pid_parser
> [ 2437.891824] dvb-usb: could not handle pid_parser
> 
> A channel scan with Kaffeine was not successfull. Here the results:
> 
> kbuildsycoca running...
> Reusing existing ksycoca
> /dev/dvb/adapter0/frontend0 : opened ( Afatech AF9013 DVB-T )
> /dev/dvb/adapter1/frontend0 : opened ( Afatech AF9013 DVB-T )
> 0 EPG plugins loaded for device 0:0.
> 0 EPG plugins loaded for device 1:0.
> Loaded epg data : 0 events (0 msecs)
> kio (KMimeType): WARNING: KServiceType::offers : servicetype
> ThumbCreator not found
> kio (KMimeType): WARNING: KServiceType::offers : servicetype
> ThumbCreator not found
> tom at super-klappi:~$ DvbCam::probe(): /dev/dvb/adapter0/ca0: : No such
> file or directory
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 402000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> .FE_READ_STATUS: Remote I/O error
> 
> Transponders: 1/63
> 
> Invalid section length or timeout: pid=17
> 
> Frontend closed
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 490000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> .FE_READ_STATUS: Remote I/O error
> 
> Transponders: 12/63
> 
> Invalid section length or timeout: pid=17
> 
> Frontend closed
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 514000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> .FE_READ_STATUS: Remote I/O error
> 
> Transponders: 15/63
> 
> Invalid section length or timeout: pid=17
> 
> Frontend closed
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 538000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> .FE_READ_STATUS: Remote I/O error
> 
> Transponders: 18/63
> 
> Invalid section length or timeout: pid=17
> 
> Frontend closed
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 562000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> .FE_READ_STATUS: Remote I/O error
> 
> Transponders: 21/63
> 
> Invalid section length or timeout: pid=17
> 
> Frontend closed
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 586000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> .FE_READ_STATUS: Remote I/O error
> 
> Transponders: 24/63
> 
> Invalid section length or timeout: pid=17
> 
> Frontend closed
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 610000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> .FE_READ_STATUS: Remote I/O error
> 
> Transponders: 27/63
> 
> Invalid section length or timeout: pid=17
> 
> Frontend closed
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 698000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> .FE_READ_STATUS: Remote I/O error
> 
> Transponders: 38/63
> 
> Invalid section length or timeout: pid=17
> 
> Frontend closed
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 722000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> .FE_READ_STATUS: Remote I/O error
> 
> Transponders: 41/63
> 
> Invalid section length or timeout: pid=17
> 
> Frontend closed
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 746000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> .FE_READ_STATUS: Remote I/O error
> 
> Transponders: 44/63
> 
> Invalid section length or timeout: pid=17
> 
> Frontend closed
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 770000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> .FE_READ_STATUS: Remote I/O error
> 
> Transponders: 47/63
> 
> Invalid section length or timeout: pid=17
> 
> Frontend closed
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 858000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> .FE_READ_STATUS: Remote I/O error
> 
> Transponders: 58/63
> 
> Invalid section length or timeout: pid=17
> 
> Frontend closed
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Using DVB device 0:0 "Afatech AF9013 DVB-T"
> tuning DVB-T to 882000000 Hz
> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
> ERROR tuning 
> : Invalid argument
> Frontend closed
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> openFe:: Device or resource busy
> dvbsi: Cant tune DVB
> Transponders: 63
> dvbsi: The end :)
> Channels found: 0
> 
> Thomas
> 
> 
> Am Freitag, den 18.07.2008, 23:49 +0300 schrieb Antti Palosaari:
> > Antti Palosaari wrote:
> > > tom wrote:
> > >> Hello,
> > >> since a few days I'm trying hard make this stick running. One basic problem is that I'm not able to find out which chipset is in this
> > >> stick.
> > >> I have tried af9015 driver and firmware, but it doesn't work.
> > > 
> > > It looks like AF9015 dual design. I think problem you have is missing 
> > > device USB-IDs. I will add those in a next few hours and you can test 
> > > then again.
> > 
> > Now it is ready for the test.
> > http://linuxtv.org/hg/~anttip/af9015/
> > 
> > Antti




More information about the linux-dvb mailing list