[linux-dvb] scan fails to detect pid's for streams

[Trygve Iversland]

[...]
>  As you can see it tunes to pid 0 for both audio and video
>
>  Here is the channel data from the channel.conf file:
>
>  NRK2:722000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:102
>
Seems that you are trying to tune to norwegian H.264/AAC channels,
which aren't supported by scan. A patch is described at
http://www.mythtv.co.nz/mythtv/
Running scan with -vv will give you a quick idea of which pid's to
use. You should probably end up with something like this:

NRK2:722000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:525:692:102


Trygve