[linux-dvb] Any chance of help with v4l-dvb-experimental / Avermedia A16D please?

[Richard (MQ)]

Richard (MQ) wrote:
>> Hmm... I missed to add a small line at board description:
>> 		.mpeg           = SAA7134_MPEG_DVB,
> 
> Added that line, and now it gives an oops:

Rebuilt with that line commented out, and the module loads again.

> We do have analogue TV here so I will be pleased to test it - what GUI
> tool do you suggest? Kdetv? xawtv? I assume I'll need to get the module
> to load though, is there any point in re-building without the .mpeg line?

Tried with kdetv launched from command-line, the following was (the
only) problem visible in the output that it created - full text in
attachment in case it's relevant.

> Request decoding of services 0x60000c7f, strict level -1
> Will capture services 0x00000000, added 0x0 commit:1
> v4l2k_new: failed with errno=22, msg='Sorry, /dev/vbi (AVerMedia Hybrid TV/Radio (A16D) cannot capture any of the requested data services.' guess=''
> Try to open v4l vbi device, libzvbi interface rev.
>   $Id: io-v4l.c,v 1.28 2004/12/30 02:23:59 mschimek Exp $
> Opened /dev/vbi
> Driver name 'AVerMedia Hybrid TV/Radio (A16D'

kdetv reported no error on-screen (just the message above). Perhaps
unsurprising that no channels were found.

Once more, I'd much appreciate your comments.

PS - timf, is your card actually an A16D? I appreciate you're in Oz, but
it seems to be behaving very differently.
-- 
Cheers
Richard (MQ)

-------------- next part --------------
A non-text attachment was scrubbed...
Name: kdetv.txt.tar.gz
Type: application/x-gzip
Size: 1180 bytes
Desc: not available
Url : http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080324/e3c25787/attachment.bin