[linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
sonofzev at iinet.net.au
Wed May 14 01:30:29 CEST 2008
I've been using Chris Pascoe's sources. I turned off the forced card
number and the auto-detection seems to be working.
I don't know if it's weather related or if it's to do with additional
interference from the card, but since I got it working, channel 9 (which
is usually very good) and ABC reception (which seems to come in and out)
has gone to unwatchable. Any thoughts on this? (should I run separate
cables from my antenna amplifier to each card, or is using the out port
on the Fusion Lite to the Express okay?)
I'm studying for an exam next week, but if you'd like me to test your
sources I can try that after next week.
On Tue, 2008-05-13 at 18:57 +1000, stev391 at email.com wrote:
> If you have used the v4l-dvb hg drivers and my patch the card should
> auto detect, however if you want to force it, the number should be 10.
> If you are using Chris Pascoe's xc-test branch then 5 is the correct
> card number, but again it should auto detect.
> Please advise which driver source you have been using.
> Regards Stephen.
> ----- Original Message -----
> From: "allan k"
> To: stev391 at email.com
> Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express
> - When will it be
> Date: Tue, 13 May 2008 18:19:27 +1000
> Hi Steve
> I had the wrong card number selected. I have changed to card=5
> and the
> tuner is now working correctly.
> I haven't restarted the machine, but will do so later and
> whether I am getting the same problem as you saw on one of
> your boxes.
> On Sat, 2008-05-10 at 18:14 +1000, stev391 at email.com wrote:
> > Allan,
> > It was tested with in two different machines against the
> > version of the card. However the next day I built another
> > with this card and I ran into errors in my dmesg stating
> that the
> > firmware version doesn't match. I haven't had enough time to
> find out
> > why this has happened, but I think the tuner is not being
> > properly. What are your results of running this patch?
> > Regards,
> > Stephen
> > ----- Original Message -----
> > From: "sonofzev at iinet.net.au" To:
> > linux-dvb at linuxtv.org, stev391 at email.com
> > Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual
> > - When will it be
> > Date: Thu, 08 May 2008 18:02:00 +0800
> > Hi Stephen, Has this been tested with the
> > newer cx23885 version of the
> > card or only the older cx88 version. I have had
> > no success with my cx23885 version. cheers
> > Allan
> > On Tue May 6 11:39 , stev391 at email.com sent:
> > G'day,
> > I was just wondering when Chris Pascoe's code for the
> > DViCO Fusion HDTV Dual Express will be merged into the
> > v4l-dvb tree, as there have been some minor updates
> > that increase the stability of the card that are not
> > in his tree.
> > Attached is a patch for merging the relevant sections
> > back into the v4l-dvb tree (and including updating
> > Kconfig). This has been successfully tested on two
> > different PCs with this card (working with gxine and
> > mythtv, in Melbourne, Australia).
> > Regards,
> > Stephen.
> > -- See Exclusive Video: 10th
> > Annual Young Hollywood
> > Awards
> > -- See Exclusive Video: 10th Annual Young Hollywood Awards
> See Exclusive Video: 10th Annual Young Hollywood Awards
More information about the linux-dvb