[linux-dvb] TT S-1401 problem with kernel 2.6.24 ???

hermann pitton hermann-pitton at arcor.de
Thu May 15 02:23:58 CEST 2008


Am Dienstag, den 13.05.2008, 19:55 +0400 schrieb Andrew Junev:
> Thursday, April 10, 2008, 3:03:10 AM, you wrote:
> 
> > Am Mittwoch, den 09.04.2008, 10:17 +0400 schrieb Andrew Junev:
> >> > Hi Andrew,
> >> 
> >> > Am Dienstag, den 08.04.2008, 19:34 +0400 schrieb Andrew Junev:
> >> >> Hello Hermann,
> >> >> 
> >> >> Monday, April 7, 2008, 2:58:05 AM, you wrote:
> >> >> 
> >> >> > you always drop the lists.
> >> >> 
> >> >> Not always. :) I do it just sometimes, when I feel my message doesn't
> >> >> contain useful information for everybody on the list.
> >> >> But we can move back to the lists, if you think it's more appropriate.
> >> >> 
> >> >> > I come back to you, if nobody else who is more fluently in just add a
> >> >> > patch and compile a vanilla kernel does not move in. 
> >> >> 
> >> >> Well, I believe I can do it, if noone else does. It shouldn't be that
> >> >> hard.
> >> >> 
> >> >> > I of course know for sure the fix is correct, but the stable team wants
> >> >> > a report from a user on 2.6.24 and support for my stuff is new and it is
> >> >> > nonsense to bring it down to 2.6.24 to demonstrate it working for
> >> >> > someone on 2.6.24 ...
> >> >> 
> >> >> I wonder how the unpatched driver made its way to 2.6.24 stable...
> >> >> Or maybe it's just me who gets affected by this problem that much.
> >> >> 
> >> >> > B.T.W, why you don't use at least the v4l-dvb master stuff to come over
> >> >> > it. Needs no patching :)
> >> >> 
> >> >> If I ever need to move to 2.6.24 and it gets no patch included by
> >> >> then, I'll surely do so! :)
> >> >> At the moment I'm perfectly fine with 2.6.23...
> >> >> 
> >> 
> >> > however it will go out for now, seems in the end you will have something
> >> > to test ;)
> >> 
> >> 
> >> I have no problems with that! :)
> >> 
> >> Ok, can you point me to a guide on how to do this? Otherwise I'm
> >> affraid I'll waste lots of time just by trying something that I should
> >> not...
> >> 
> >> I'm ready to test it sometime this week.
> >> 
> 
> > Hi Andrew,
> 
> > Mike has forwarded the patch to the stable kernel team. (Thanks!)
> 
> > Likely it will be fixed in 2.6.24.5 then.
> 
> > To build a vanilla kernel is still a very easy task, but there are
> > distribution specific helper scripts and customs.
> 
> > The real problem, that could appear, is that dependencies on other
> > utilities are not resolved on your current distribution version anymore
> > and you run into some circular dependencies, not easy to resolve and
> > then you must know what you are doing exactly or upgrade.
> 
> > If a 2.6.24 is available for your current stuff, just install it and see
> > the missing. If you then install the kernel source for it, we can apply
> > the patch also there and build a new kernel.
> 
> > Cheers,
> > Hermann
> 
> 
> Sorry for my slow response...
> I just installed kernel 2.6.24.5 and my S-1401 works good now!
> 
> Thanks a million to everyone who was involved!
> 
> And once again sorry for not providing my feedback fast enough.
> 

Hi Andrew,

thanks for your report!

If someone would have been able to jump in earlier, it would have caused
less noise.

Maybe it is good for something.

Some others have noticed, that we don't have always the fully testing
capabilities on all hardware around.

Some likely assumed until now, that this is no problem at all ...

Cheers,
Hermann





More information about the linux-dvb mailing list