[linux-dvb] [ANNOUNCE] scan-s2 is available, please test

[Michel Verbraak]

Goga777 schreef:
> Приветствую, Michel
>
> but cx24116 based cards don't work with fec=auto for dvb-s2 
>
> I'm not sure - may be for cx24116 cards the parameters roll off & modulation are obligatory (not optional)
>
>
>
>   
>> Tested your scan-s2 with a Technisat HD2 card.
>>
>> Scanning works. But some channels are reported twice with different 
>> frequency. I found an error which is fixed by the patch file named 
>> scan.c.diff1.
>>
>> I would also like to propose the following change (see file scan.c.diff2 
>> or scan.c.diff which includes both patches). This change makes it 
>> possible to only scan for DVB-S channels or DVB-S2 channels or both. 
>> This is done by specifying lines starting with S or S2 in the input file.
>>
>> example input file:
>> # Astra 19.2E SDT info service transponder
>> # freq pol sr fec
>> S 12522000 H 22000000 2/3       <only DVB-S channels are scanned>
>> S 11914000 H 27500000 AUTO
>> S 10743750 H 22000000 5/6
>> S 12187500 H 27500000 3/4
>> S 12343500 H 27500000 3/4
>> S 12515250 H 22000000 5/6
>> S 12574250 H 22000000 5/6
>> S2 12522000 H 22000000 AUTO    <only DVB-S2 channels are scanned>
>> S2 11914000 H 27500000 AUTO
>>
>> I hope this is usefull.
>>
>> Regards,
>>
>> Michel.
>>     
>
>
>   

Goga,

AUTO fec does work because the following is the result for the DVB-S2 
channels I get with the above input:

PREMIERE HD:11914:h:0:27500:767:772:129:6
DISCOVERY HD:11914:h:0:27500:1023:1027:130:6
ASTRA HD+:11914:h:0:27500:1279:1283:131:6
ANIXE HD:11914:h:0:27500:1535:1539:132:6

Regards,

Michel.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20081101/20aa5c0e/attachment.htm