[linux-dvb] [ANNOUNCE] scan-s2 is available, please test

Goga777 goga777 at bk.ru
Sat Nov 1 16:50:45 CET 2008


> > Приветствую, Michel
> >
> > but cx24116 based cards don't work with fec=auto for dvb-s2 
> >
> > I'm not sure - may be for cx24116 cards the parameters roll off & modulation are obligatory (not optional)
> >
> >
> >
> >   
> >> Tested your scan-s2 with a Technisat HD2 card.
> >>
> >> Scanning works. But some channels are reported twice with different 
> >> frequency. I found an error which is fixed by the patch file named 
> >> scan.c.diff1.
> >>
> >> I would also like to propose the following change (see file scan.c.diff2 
> >> or scan.c.diff which includes both patches). This change makes it 
> >> possible to only scan for DVB-S channels or DVB-S2 channels or both. 
> >> This is done by specifying lines starting with S or S2 in the input file.
> >>
> >> example input file:
> >> # Astra 19.2E SDT info service transponder
> >> # freq pol sr fec
> >> S 12522000 H 22000000 2/3       <only DVB-S channels are scanned>
> >> S 11914000 H 27500000 AUTO
> >> S 10743750 H 22000000 5/6
> >> S 12187500 H 27500000 3/4
> >> S 12343500 H 27500000 3/4
> >> S 12515250 H 22000000 5/6
> >> S 12574250 H 22000000 5/6
> >> S2 12522000 H 22000000 AUTO    <only DVB-S2 channels are scanned>
> >> S2 11914000 H 27500000 AUTO
> >>
> >> I hope this is usefull.
> >>
> >> Regards,
> >>
> >> Michel.
> >>     
> >
> >
> >   
> 
> Goga,
> 
> AUTO fec does work because the following is the result for the DVB-S2 
> channels I get with the above input:
> 
> PREMIERE HD:11914:h:0:27500:767:772:129:6
> DISCOVERY HD:11914:h:0:27500:1023:1027:130:6
> ASTRA HD+:11914:h:0:27500:1279:1283:131:6
> ANIXE HD:11914:h:0:27500:1535:1539:132:6

you have stb0899 based card, but I have mean cx24116 based card.

Goga




More information about the linux-dvb mailing list