[linux-dvb] tbs 8920 / cx24116 not working

Helmut Auer vdr at helmutauer.de
Fri Nov 7 23:43:14 CET 2008


Hello List,

I just tried to get my tbs 8920 running with current S2API and VDR and 
also with the multiproto drivers and a patch for this card.
Both versions are failing, with this error:

Nov  7 23:39:26 [kernel] LNB Voltage SEC_VOLTAGE_18
Nov  7 23:39:26 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation 
wird nicht unterstützt
Nov  7 23:39:35 [vdr] [23138] frontend 0 timed out while tuning to 
channel 3, tp 112187
Nov  7 23:39:35 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation 
wird nicht unterstützt
Nov  7 23:39:35 [kernel] LNB Voltage SEC_VOLTAGE_18
Nov  7 23:39:44 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation 
wird nicht unterstützt
Nov  7 23:39:44 [kernel] LNB Voltage SEC_VOLTAGE_18

dmesg shows:

LNB Voltage SEC_VOLTAGE_off
ACPI: PCI interrupt for device 0000:01:09.0 disabled
cx88/2: unregistering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=71]
ACPI: PCI interrupt for device 0000:01:09.2 disabled
Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 11 (level, 
low) -> IRQ 11
cx88[0]: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 
[card=72,autodetected], frontend(s): 1
cx88[0]: TV tuner type 4, Radio tuner type -1
cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 11, latency: 165, mmio: 
0xfc000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 11 (level, 
low) -> IRQ 11
cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 11, latency: 64, mmio: 
0xfd000000
cx8802_probe() allocating 1 frontend(s)
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72]
cx88[0]/2: cx2388x based DVB/ATSC card
DVB: registering new adapter (cx88[0])
DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
cx24116_firmware_ondemand: Waiting for firmware upload 
(dvb-fe-cx24116.fw)...
cx24116_firmware_ondemand: Waiting for firmware upload(2)...
cx24116_load_firmware: FW version 1.22.82.0
cx24116_firmware_ondemand: Firmware upload complete
LNB Voltage SEC_VOLTAGE_13
LNB Voltage SEC_VOLTAGE_18

I also tested this patch:
http://hg.kewl.org/v4l-dvb/raw-rev/8d6d8974b33d

but without any change.

Any hints whats going wrong here ?

-- 
Helmut Auer, helmut at helmutauer.de 




More information about the linux-dvb mailing list