[linux-dvb] Patch for Leadtek DTV1800H, DTV2000H (rev I, J), and (not working yet) DTV2000H Plus

[Jonathan]

Hi,

Yea I did, I even checked it by plugging the cable into the cd, and then 
recording within the radio programme, successfully. Which basically narrowed 
it down to the TV card in some capacity. The last update to this card didn't 
support PAL terribly well.

cheers

Jon


On Sun, 30 Nov 2008 01:30:17 am Mirek Slugeň wrote:
> Hi, you should connect internal cable from your TV card to your sound
> card, or use "arecord -D hw:1 -f dat 2>/dev/null | aplay -f dat
> 2>/dev/null"
>
> Mirek
>
> Jonathan napsal(a):
> > On Fri, 28 Nov 2008 10:45:44 pm Mirek Slugeň wrote:
> >> Hi, all 3 patches are in one file, they depend on each other.
> >>
> >> All GPIOs spoted from Windows with original APs
> >>
> >> DTV1800H - there is patch pending in this thread from Miroslav Sustek,
> >> this is only modification of his patch, difference should be only in
> >> GPIOs (I think it is better to use GPIOs from Windows).
> >>
> >> DTV2000H (rev. I) - Only renamed from original old DTV2000H
> >>
> >> DTV2000H (rev. J) - Almost everything is working, I have problem only
> >> with FM radio (no sound).
> >>
> >> DTV2000H Plus - added pci id, GPIOs, sadly Tuner is XC4000, so it is not
> >> working yet.
> >>
> >> Mirek Slugen
> >
> > Hi Mirek,
> >
> > Nice work with the patch!
> >
> > I gave it a go and found that I still can't get sound for analogue TV and
> > radio.
> > I have a DTV2000H rev J
> > Tried:
> >  - KdeTV
> >  - TVtime
> >  - Gnome radio
> >
> > I'm in Australia with PAL format TV
> >
> > Attached is the dmesg output
> >
> > What ya think?
> >
> > Jon
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb at linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb