[linux-dvb] .:: Trouble with StarSat 2 ::.

[Seyyed Mohammad mohammadzadeh]

I have installed a StarSat2 DVB-S2 PCI card. on SuSE 11.0 with kernel
version equal to 2.6.25.16-0.1-pae. the system recognise the card as follow:

lspci -vv:
------------
03:02.0 Multimedia video controller: Trigem Computer Inc. Device 036f (rev
01)
        Subsystem: Device 0001:2004
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: I/O ports at 6000 [size=256]
        Kernel driver in use: dm1105
        Kernel modules: dm1105
======================

dmesg:
----------
DVB: registering new adapter (dm1105)
dm1105 0000:03:02.0: MAC 00:18:bd:00:6c:bb
DVB: registering frontend 0 (Conexant CX24116/CX24118)...
===========================================

but when i want to tune it I got DISEqC error:

linux-kluk:~ # dvbtune -f 11555 -p v -s 27500
Using DVB card "Conexant CX24116/CX24118", freq=11555
tuning DVB-S to Freq: 1805000, Pol:V Srate=27500000, 22kHz tone=off, LNB: 0
Setting only tone OFF and voltage 13V
DISEQC SETTING FAILED

I tested it with kaffeine and got this message:
Tuning to: algo / autocount: 1
DvbCam::probe(): /dev/dvb/adapter0/ca0: : No such file or directory
Using DVB device 0:0 "Conexant CX24116/CX24118"
tuning DVB-S to 11555000 v 27500000
inv:2 fecH:9
DiSEqC: switch pos 0, 13V, loband (index 0)
FE_SET_TONE failed: Connection timed out
DiSEqC: e0 10 38 f0 00 00
FE_DISEQC_SEND_MASTER_CMD failed: Connection timed out
FE_DISEQC_SEND_MASTER_CMD failed: Connection timed out
FE_SET_TONE failed: Connection timed out
. LOCKED.
NOUT: 1
dvbEvents 0:0 started
Tuning delay: 4243 ms
pipe opened
xine pipe opened /home/user/.kaxtv1.ts

But no video is played. Szap output seems to be fake because no data is
received on /dev/dvb/adapter0/dvr0:

zapping to 5 'Traffic':
sat 0, frequency = 11137 MHz V, symbolrate 30000000, vpid = 0x1fff, apid =
0x1fff sid = 0x03e8
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
FE_SET_TONE failed: Connection timed out
FE_DISEQC_SEND_MASTER_CMD failed: Connection timed out
FE_SET_TONE failed: Connection timed out
status 19 | signal  99% | snr  70% | ber 101940526 | unc 36167 | FE_HAS_LOCK
status 19 | signal  99% | snr  70% | ber 101940526 | unc 36167 | FE_HAS_LOCK
status 19 | signal  99% | snr  70% | ber 101940526 | unc 36167 | FE_HAS_LOCK
status 19 | signal  99% | snr  70% | ber 101940526 | unc 36167 | FE_HAS_LOCK
status 19 | signal  99% | snr  70% | ber 101940526 | unc 36167 | FE_HAS_LOCK

Anybody helps?

-- 
Best Regards
Mehran

Softnhard = Software & Hardware expert
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20081011/fdb4469a/attachment.htm