[linux-dvb] Re : Re : Re : Re : Twinhan 1041 (SP 400) lock and scan problems - the solution [not quite :(]

[Manu Abraham]

Hi,

Emmanuel ALLAUD wrote:
> Le 06.10.2008 06:33:56, Alex Betis a écrit :
>> Emmanuel,
>>
>> As I wrote:
>>> Just to clarify it, the changes mostly affect DVB-S channels
>>> scanning,
>>> it
>>> doesn't help with DVB-S2 locking problem since the code is totally
>>> different
>>> for S and S2 signal search.
>> The 11495 channel you reported as bad is DVB-S2, so my changes 
>> doesn't
>> help
>> for that channel.
>>
>> I hope Manu will find a solution since I don't have any documentation
>> for
>> that chip and solving the DVB-S2 problem needs knowledge in chip
>> internals.
> 
> OK so here are the 2 logs using simpledvbtune, one using dvb-s2 and the 
> other dvb-s (and I check the tables from the other transponders of this 
> sat, this transponder is declared as DVB-S).
> In any case you will see that something is picked up in both cases but 
> nothing comes out fine finally.
> I CCed Manu to see if he can shed some light!
> This is done with a clean multiproto tree IIRC, verbose=5 for both 
> stbxxxx modules.


I will take a look at this. BTW, any idea what FEC you are using for the
  transponder you are trying to tune to ?


Regards,
Manu