[linux-dvb] [PATCH] Add syntek corp device to au0828

Michael Krufky mkrufky at linuxtv.org
Thu Oct 16 17:11:39 CEST 2008


On Thu, Oct 16, 2008 at 9:25 AM, Mark Kimsal <mark at metrofindings.com> wrote:
> The woodbury is the first model I chose, and it seems to work.  I tried two
> others and they do not tune any channels, although the module au0828 does
> load.  Watching ATSC works fine, haven't tried NTSC or QAM.
>
> diff -r 9273407ca6e1 linux/drivers/media/video/au0828/au0828-cards.c
> --- a/linux/drivers/media/video/au0828/au0828-cards.c   Wed Oct 15 02:50:03
> 2008 +0400
> +++ b/linux/drivers/media/video/au0828/au0828-cards.c   Thu Oct 16 09:23:50
> 2008 -0400
> @@ -212,6 +212,8 @@ struct usb_device_id au0828_usb_id_table
>                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
>        { USB_DEVICE(0x2040, 0x8200),
>                .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
> +       { USB_DEVICE(0x05e1, 0x0400),
> +               .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
>        { },
>  };

Mark,

I thought this stick had an MT2130 inside -- looks like you've got
another revision with a TDA18271... very interesting :-)

You say that ATSC works -- does it work on more than just one channel?
 If ATSC works, then QAM should work as well.  NTSC is not yet
supported in the Linux driver.

Can you show me the dmesg output when the driver loads?  Also, can you
give me the exact name of the device (from the retail package) ?

Regards,

Mike



More information about the linux-dvb mailing list