[linux-dvb] hi all

fín paulfinn81 at gmail.com
Tue Jun 18 14:26:03 CEST 2013


i have a USB DVB dongle here:

WinfastDTV Dongle Gold BDA Device (this is what windows recognises it as)
Linux on the other see's it as a Keyboard.


im trying to connect it to an android, is this the place to look for help
regarding drivers?

<4>[28617.147589 at 0] HOST mode
<4>[28617.363317 at 0] Using Buffer DMA mode
<4>[28617.363344 at 0] OTG VER PARAM: 1, OTG VER FLAG: 1
<4>[28617.410265 at 0] Init: Port Power? op_state=1
<4>[28617.410289 at 0] Init: Power Port (0)
<4>[28617.412105 at 0] set usb port power on (board gpio 25)!
<4>[28617.757543 at 0] Indeed it is in host mode hprt0 = 00021501
<6>[28617.937544 at 0] usb 1-1: new high speed USB device number 3 using
dwc_otg
<4>[28617.939548 at 0] Indeed it is in host mode hprt0 = 00001101
<6>[28618.203838 at 0] Turbosight DTB03: Fixing fullspeed to highspeed
interval: 16 -> 8
<6>[28618.219686 at 0] input: Turbosight DTB03 as
/devices/lm0/usb1/1-1/1-1:1.1/input/input8
<6>[28618.258041 at 0] generic-usb 0003:15A4:9016.0002: input,hidraw0: USB HID
v1.01 Keyboard [Turbosight DTB03] on usb-lm0-1/input1
<4>[28628.736599 at 0] RTL871X: rtw_set_ps_mode: Leave 802.11 power save
<4>[28628.736934 at 0] RTL871X: rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2
UAPSD=0
<4>[28631.097591 at 0] RTL871X: rtw_set_ps_mode: Enter 802.11 power save
<4>[28631.097928 at 0] RTL871X: rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2
UAPSD=0
<4>[28633.778113 at 1] RTL871X: rtw_set_ps_mode: Leave 802.11 power save
<4>[28633.778556 at 1] RTL871X: rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2
UAPSD=0
<4>[28635.097638 at 0] RTL871X: rtw_set_ps_mode: Enter 802.11 power save
<4>[28635.097967 at 0] RTL871X: rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2
UAPSD=0
<4>[28640.077238 at 1] ERROR::dwc_otg_hcd_urb_enqueue:504: Not connected
<4>[28640.077253 at 1]
<4>[28640.107229 at 1] ERROR::dwc_otg_hcd_urb_enqueue:504: Not connected
<4>[28640.107244 at 1]
<4>[28640.167247 at 1] ERROR::dwc_otg_hcd_urb_enqueue:504: Not connected
<4>[28640.167262 at 1]
<4>[28640.247304 at 0] DEVICE mode
<4>[28640.247370 at 0] PortPower off
<4>[28640.247424 at 0] set usb port power off (board gpio 25)!
<4>[28640.252873 at 0] SRP: Device mode
<6>[28640.267394 at 0] usb 1-1: USB disconnect, device number 3
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.linuxtv.org/pipermail/linux-dvb/attachments/20130618/eff8277b/attachment.html>


More information about the linux-dvb mailing list