[From nobody Tue Jan 23 17:40:37 2007 X-DN-ReceivedFileId: 10f28d01603_LHF4_im_121614.eml Message-ID: <45B60490.1000305@elec.gla.ac.uk> Date: Tue, 23 Jan 2007 12:50:24 +0000 From: Dougie McGilvray <d.mcgilvray@elec.gla.ac.uk> User-Agent: Thunderbird 1.5.0.9 (X11/20070103) MIME-Version: 1.0 To: Gunther Mayer <gunther.mayer@gmx.net> Subject: Re: [linux-dvb] Pinnacle 250i(?) can someone provide tips for me to create a patch for this? References: <45B4DC72.6050506@elec.gla.ac.uk> <45B523FB.8050103@gmx.net> In-Reply-To: <45B523FB.8050103@gmx.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Certainly, An archive with photos and inf files can be found at the url below, http://userweb.elec.gla.ac.uk/d/dougiemc/pinnacle_250.tar.gz I'm assuming from the bottom of the box that the model number is 250i, I can't see any other indication of a model number. I'll be happy to provide anything else which is of use :) Dougie lspci -v 00:0c.0 Multimedia controller: Pinnacle Systems Inc. Unknown device 0040 Subsystem: Pinnacle Systems Inc. Unknown device 0047 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at db001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 00:0c.2 Multimedia controller: Pinnacle Systems Inc. Unknown device 0042 Subsystem: Pinnacle Systems Inc. Unknown device 0047 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at db002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 lspci-vn 00:0c.0 0480: 11bd:0040 Subsystem: 11bd:0047 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at db001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 00:0c.2 0480: 11bd:0042 Subsystem: 11bd:0047 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at db002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 And for good measure... scanpci -v pci bus 0x0000 cardnum 0x0c function 0x00: vendor 0x11bd device 0x0040 Pinnacle Systems Inc. Device unknown CardVendor 0x11bd card 0x0047 (Card unknown) STATUS 0x3290 COMMAND 0x0006 CLASS 0x04 0x80 0x00 REVISION 0x00 BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08 BASE0 0xdb001000 addr 0xdb001000 MEM MAX_LAT 0x10 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x0b BYTE_0 0x01 BYTE_1 0x00 BYTE_2 0x42 BYTE_3 0x06 pci bus 0x0000 cardnum 0x0c function 0x02: vendor 0x11bd device 0x0042 Pinnacle Systems Inc. Device unknown CardVendor 0x11bd card 0x0047 (Card unknown) STATUS 0x3290 COMMAND 0x0006 CLASS 0x04 0x80 0x00 REVISION 0x00 BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08 BASE0 0xdb002000 addr 0xdb002000 MEM MAX_LAT 0x10 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x0b BYTE_0 0x01 BYTE_1 0x00 BYTE_2 0x42 BYTE_3 0xfe Gunther Mayer wrote: > Hi, > > can you send me a picture of your card and further info for inclusion > to my > http://www.bttv-gallery.de ? > > 1st priority: > - picture of the card, the card backside (high resolution pics if > feasible) > - lspci -v > - lspci -vn > > further information: > - pictures of remote control and of original package (if feasible) > - all *.INF from the Windows driver CD > > Regards, Gunther > > > Dougie McGilvray wrote: >> >> >> Hi there. >> >> I just purchased a PCTV PCI card. Being a single tuner card, I >> believed it to be a 300i. The only suggestion as to the specific >> model number is 250i, However, it seems that the card is a clone of >> the dual tuner card with an empty space where the other tuner IC >> should be. The following output from scanpci seems to support this >> theory, which shows two unknown devices which match two of the three >> devices for the dual tuner card on the PCI DVB-T wiki page: >> >> http://www.linuxtv.org/wiki/index.php/PCI_devices_DVB-T >> >> I'm hoping it isn't too difficult to add support for this card, I'm >> happy to modify and test the code, al long as someone someone can >> give some advice of where exactly to start. >> >> Cheers, >> Dougie >> >> Two IP's are visible: >> >> 1. is labelled WJCE6353 which appears to be the same as a ZL10353 >> demuxer >> 2. is labelled as DTV Bridge 0635MP002 >> >> >> root@maximum:~# lspci -vvv >> --- >> 00:0c.0 Multimedia controller: Pinnacle Systems Inc. Unknown device 0040 >> Subsystem: Pinnacle Systems Inc. Unknown device 0047 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >> >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- >> Latency: 32 (500ns min, 4000ns max), Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 11 >> Region 0: Memory at db001000 (32-bit, non-prefetchable) [size=4K] >> Capabilities: [40] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA >> PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:0c.2 Multimedia controller: Pinnacle Systems Inc. Unknown device 0042 >> Subsystem: Pinnacle Systems Inc. Unknown device 0047 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >> >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- >> Latency: 32 (500ns min, 4000ns max), Cache Line Size: 32 bytes >> Interrupt: pin A routed to IRQ 11 >> Region 0: Memory at db002000 (32-bit, non-prefetchable) [size=4K] >> Capabilities: [40] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA >> PME(D0+,D1+,D2+,D3hot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> --- >> >> >> >> >> >> >> >> _______________________________________________ >> linux-dvb mailing list >> linux-dvb@linuxtv.org >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >> -- _________________________________________ Douglas McGilvray Centre for Music Technology Rankine Building University of Glasgow Glasgow, G12 8QQ http://cmt.gla.ac.uk/ ]