<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Michel Verbraak schreef:
<blockquote cite="mid45E1634C.6040703@verbraak.org" type="cite">Manu
Abraham schreef:
<br>
<blockquote type="cite">On 2/23/07, Michel Verbraak
<a class="moz-txt-link-rfc2396E" href="mailto:michel@verbraak.org"><michel@verbraak.org></a> wrote:
<br>
<blockquote type="cite"><br>
Just bought a new cpu and motherboard and made a clean install of FC6
and
<br>
made a vanilla 2.6.20 kernel.
<br>
<br>
tried to merge the kromtek.com/dvb/mantis.tar.bz2 driver into the
2.6.20
<br>
kernel.
<br>
<br>
</blockquote>
<br>
Sorry for the delayed mail, somehow it skipped my eye.
<br>
Did quite a bit of work and ported the mantis tree ..
<br>
<a class="moz-txt-link-freetext" href="http://kromtek.com/dvb/mantis-v4l-dvb.tar.bz2">http://kromtek.com/dvb/mantis-v4l-dvb.tar.bz2</a>
<br>
<br>
that warning, what you saw is fine, it came in after the i2c changes
<br>
in .20. It is fixed in the tree that i have put at the URL above.
<br>
diseqc stuff shouldn't be a problem though.
<br>
<br>
Would be interesting to know how it goes at your side.
<br>
<br>
<br>
regards,
<br>
manu
<br>
</blockquote>
Manu,
<br>
<br>
I will test this version tonight and report back.
<br>
My rotor is working fine I discovered a small bug in my own software.
When this was fixed I could rotate the dish without problems.
<br>
<br>
Regards,
<br>
<br>
Michel.
<br>
<br>
<br>
_______________________________________________
<br>
linux-dvb mailing list
<br>
<a class="moz-txt-link-abbreviated" href="mailto:linux-dvb@linuxtv.org">linux-dvb@linuxtv.org</a>
<br>
<a class="moz-txt-link-freetext" href="http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb">http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb</a>
<br>
</blockquote>
Manu,<br>
<br>
The 24th of february 2007 version works allright for me. Following in
messagelog:<br>
<br>
<small>ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKB] -> GSI
19 (level, low) -> IRQ 19<br>
irq: 19, latency: 32<br>
memory: 0xf68ff000, mmio: 0xffffc2000002e000<br>
found a VP-1034 PCI DVB-S/DSS device on (02:05.0),<br>
Mantis Rev 1 [1822:0014], irq: 19, latency: 32<br>
memory: 0xf68ff000, mmio: 0xffffc2000002e000<br>
MAC Address=[00:08:ca:19:9f:0b]<br>
mantis_alloc_buffers (0): DMA=0xde50000 cpu=0xffff81000de50000
size=65536<br>
mantis_alloc_buffers (0): RISC=0x30a04000 cpu=0xffff810030a04000
size=1000<br>
DVB: registering new adapter (Mantis dvb adapter).<br>
mantis_frontend_init (0): Probing for MB86A16 (DVB-S/DSS)<br>
mantis_frontend_init (0): found MB86A16 DVB-S/DSS frontend @0x08<br>
DVB: registering frontend 0 (Fujitsu MB86A16 DVB-S)...</small><br>
<br>
Rotor is working allright so DiseqC is transfered normal. <br>
I merged only the mantis part into my kernel sources. This is a x86_64
kernel.<br>
<br>
What should be the differences to the previous version?<br>
<br>
I did not yet try a scan for the missing channels to see if they are
visible right now because my dish needs reallignement, reception is
poort, after a storm a few weeks ago and currently it is pooring rain
here so I was not able to get on my roof.<br>
<br>
Regards,<br>
<br>
Michel.<br>
</body>
</html>