<3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 09 ff b6 01 00 00 41 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 1 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x9 0xff 0xb6 0x1 0x0 0x0 0x41 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 09 ff b6 01 00 00 41 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 1 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x9 0xff 0xb6 0x1 0x0 0x0 0x41 <3>dst(0) dst_set_diseqc: DiseqC paket=[0] [8] [4] [e0] [10] [38] [f3] [d9] <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 08 04 e0 10 38 f3 d9 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 14 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x8 0x4 0xe0 0x10 0x38 0xf3 0xd9 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 09 ff 02 01 00 00 f5 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 4 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x9 0xff 0x2 0x1 0x0 0x0 0xf5 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 09 02 02 01 00 00 f2 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 2 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x9 0x2 0x2 0x1 0x0 0x0 0xf2 <3>dst(0) dst_set_freq: set Frequency 1236000 <3>dst(0) dst_set_frontend: Set Frequency=[1236000] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d4 01 00 6b 6c 40 07 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait NOT ready after 200 <3>dst(0) dst_set_freq: set Frequency 1236000 <3>dst(0) dst_set_frontend: Set Frequency=[1236000] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d4 01 00 6b 6c 40 07 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) write_dst: RDC 8820 RESET <3>dst(0) dst_error_bailout: Trying to bailout from previous error. <3>dst(0) rdc_8820_reset: Resetting DST <3>dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_write_tuna: write not successful <3>dst(0) dst_set_freq: set Frequency 1237718 <3>dst(0) dst_set_frontend: Set Frequency=[1237718] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d5 01 00 6b 6c 40 06 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait NOT ready after 200 <3>dst(0) dst_set_freq: set Frequency 1237718 <3>dst(0) dst_set_frontend: Set Frequency=[1237718] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d5 01 00 6b 6c 40 06 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) write_dst: RDC 8820 RESET <3>dst(0) dst_error_bailout: Trying to bailout from previous error. <3>dst(0) rdc_8820_reset: Resetting DST <3>dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_write_tuna: write not successful <3>dst(0) dst_set_freq: set Frequency 1234282 <3>dst(0) dst_set_frontend: Set Frequency=[1234282] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d2 01 00 6b 6c 40 09 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 39 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=10 <3>dst(0) read_dst: reply is 0x9 <4> 0x0 0x4 0xd2 0x1f 0x37 0x0 0x4c 0x1 0x7e