[ 0.000000] Linux version 2.6.22.15 (root@knack-desktop) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #5 SMP Sat Nov 24 12:32:42 CET 2007 () [ 0.000000] Command line: root=UUID=747661e7-cf62-488f-9cf7-edf716544b74 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037ef0000 (usable) [ 0.000000] BIOS-e820: 0000000037ef0000 - 0000000037ef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037ef3000 - 0000000037f00000 (ACPI data) [ 0.000000] BIOS-e820: 0000000038000000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 229104) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7570 checksum 0 [ 0.000000] ACPI: RSDP 000F7570, 0024 (r2 Nvidia) [ 0.000000] ACPI: XSDT 37EF30C0, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 37EFB480, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 37EF3240, 81E6 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 37EF0000, 0040 [ 0.000000] ACPI: SSDT 37EFB680, 00D3 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET 37EFB7C0, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG 37EFB840, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 37EFB5C0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000037ef0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 229104) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000037ef0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 229104 [ 0.000000] On node 0 totalpages: 229007 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1312 pages reserved [ 0.000000] DMA zone: 2631 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3076 pages used for memmap [ 0.000000] DMA32 zone: 221932 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 224563 [ 0.000000] Kernel command line: root=UUID=747661e7-cf62-488f-9cf7-edf716544b74 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 18.251165] time.c: Detected 1803.762 MHz processor. [ 18.254016] Console: colour VGA+ 80x25 [ 18.254033] Checking aperture... [ 18.254037] CPU 0: aperture @ ed20000000 size 32 MB [ 18.254039] Aperture too small (32 MB) [ 18.260816] No AGP bridge found [ 18.272333] Memory: 890076k/916416k available (2730k kernel code, 25952k reserved, 1448k data, 316k init) [ 18.272387] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 18.351596] Calibrating delay using timer specific routine.. 3610.54 BogoMIPS (lpj=7221093) [ 18.351631] Security Framework v1.0.0 initialized [ 18.351639] SELinux: Disabled at boot. [ 18.351737] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 18.352541] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 18.352918] Mount-cache hash table entries: 256 [ 18.353070] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 18.353073] CPU: L2 Cache: 512K (64 bytes/line) [ 18.353076] CPU 0/0 -> Node 0 [ 18.353099] SMP alternatives: switching to UP code [ 18.353436] Early unpacking initramfs... done [ 18.705610] ACPI: Core revision 20070126 [ 18.705685] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 18.751164] Using local APIC timer interrupts. [ 18.806539] result 12526116 [ 18.806541] Detected 12.526 MHz APIC timer. [ 18.807061] Brought up 1 CPUs [ 18.807306] NET: Registered protocol family 16 [ 18.807387] ACPI: bus type pci registered [ 18.807393] PCI: Using configuration type 1 [ 18.809186] ACPI: EC: Look up EC in DSDT [ 18.818458] ACPI: Interpreter enabled [ 18.818461] ACPI: (supports S0 S1 S3 S4 S5) [ 18.818479] ACPI: Using IOAPIC for interrupt routing [ 18.832664] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.832674] PCI: Probing PCI hardware (bus 00) [ 18.833632] PCI: Transparent bridge - 0000:00:10.0 [ 18.833672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.834002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 18.922221] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.922457] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.922690] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.922932] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15) [ 18.923164] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.923395] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.923628] ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15) [ 18.923859] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.924092] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 18.924323] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.924555] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) [ 18.924786] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.925019] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 18.925250] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.925482] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.925721] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 18.925954] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 18.926192] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.926425] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) [ 18.926659] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) [ 18.926942] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 18.927208] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 18.927474] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 18.927739] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 18.928003] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 18.928268] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 18.928533] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 18.928797] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 18.929063] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 18.929328] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 18.929594] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 18.929862] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 18.930129] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 18.930396] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 18.930663] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 18.930933] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 18.931200] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 18.931467] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 18.931743] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 18.932010] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 18.932278] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 18.932403] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.932415] pnp: PnP ACPI init [ 18.932428] ACPI: bus type pnp registered [ 18.939893] pnp: PnP ACPI: found 15 devices [ 18.939896] ACPI: ACPI bus type pnp unregistered [ 18.939983] SCSI subsystem initialized [ 18.940008] libata version 2.21 loaded. [ 18.940047] PCI: Using ACPI for IRQ routing [ 18.940052] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.940138] NET: Registered protocol family 8 [ 18.940140] NET: Registered protocol family 20 [ 18.940225] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 18.940229] hpet0: 3 32-bit timers, 25000000 Hz [ 18.941281] pnp: 00:01: ioport range 0x4000-0x407f has been reserved [ 18.941284] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved [ 18.941287] pnp: 00:01: ioport range 0x4400-0x447f has been reserved [ 18.941290] pnp: 00:01: ioport range 0x4480-0x44ff has been reserved [ 18.941293] pnp: 00:01: ioport range 0x4800-0x487f has been reserved [ 18.941296] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved [ 18.941299] pnp: 00:01: ioport range 0x2000-0x207f has been reserved [ 18.941302] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved [ 18.941306] pnp: 00:01: iomem range 0x38000000-0x3fffffff could not be reserved [ 18.941320] pnp: 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved [ 18.941326] pnp: 00:0e: iomem range 0xf0000-0xf3fff could not be reserved [ 18.941329] pnp: 00:0e: iomem range 0xf4000-0xf7fff could not be reserved [ 18.941332] pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved [ 18.941335] pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved [ 18.941607] PCI: Bridge: 0000:00:02.0 [ 18.941610] IO window: a000-afff [ 18.941613] MEM window: fd800000-fd8fffff [ 18.941616] PREFETCH window: fd700000-fd7fffff [ 18.941619] PCI: Bridge: 0000:00:03.0 [ 18.941621] IO window: 8000-8fff [ 18.941624] MEM window: fde00000-fdefffff [ 18.941627] PREFETCH window: fdd00000-fddfffff [ 18.941629] PCI: Bridge: 0000:00:04.0 [ 18.941631] IO window: b000-bfff [ 18.941634] MEM window: fdc00000-fdcfffff [ 18.941637] PREFETCH window: fd900000-fd9fffff [ 18.941640] PCI: Bridge: 0000:00:10.0 [ 18.941642] IO window: 9000-9fff [ 18.941646] MEM window: fdb00000-fdbfffff [ 18.941649] PREFETCH window: fda00000-fdafffff [ 18.941661] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 18.941667] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 18.941673] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 18.941680] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 18.941693] NET: Registered protocol family 2 [ 18.942864] Time: tsc clocksource has been installed. [ 18.978868] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 18.979265] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 18.981642] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 18.982419] TCP: Hash tables configured (established 131072 bind 65536) [ 18.982423] TCP reno registered [ 18.990938] checking if image is initramfs... it is [ 19.679535] Freeing initrd memory: 8004k freed [ 19.685757] audit: initializing netlink socket (disabled) [ 19.685771] audit(1195992122.388:1): initialized [ 19.687612] VFS: Disk quotas dquot_6.5.1 [ 19.687665] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 19.687872] fuse init (API version 7.8) [ 19.688068] io scheduler noop registered [ 19.688071] io scheduler anticipatory registered [ 19.688073] io scheduler deadline registered [ 19.688165] io scheduler cfq registered (default) [ 19.688184] Boot video device is 0000:00:05.0 [ 19.714257] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 19.714278] assign_interrupt_mode Found MSI capability [ 19.714283] Allocate Port Service[0000:00:02.0:pcie00] [ 19.714341] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 19.714361] assign_interrupt_mode Found MSI capability [ 19.714363] Allocate Port Service[0000:00:03.0:pcie00] [ 19.714414] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 19.714433] assign_interrupt_mode Found MSI capability [ 19.714436] Allocate Port Service[0000:00:04.0:pcie00] [ 19.737511] Real Time Clock Driver v1.12ac [ 19.737720] hpet_resources: 0xfefff000 is busy [ 19.737770] Linux agpgart interface v0.102 (c) Dave Jones [ 19.737772] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 19.737927] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.738200] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 19.738723] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.739011] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 19.739646] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.739843] input: Macintosh mouse button emulation as /class/input/input0 [ 19.740064] SCSI Media Changer driver v0.25 [ 19.740123] sata_nv 0000:00:0e.0: version 3.4 [ 19.740584] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 19.740597] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23 [ 19.740791] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 19.740974] scsi0 : sata_nv [ 19.741027] scsi1 : sata_nv [ 19.741106] ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001e000 irq 23 [ 19.741111] ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001e008 irq 23 [ 20.213286] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 20.226420] ata1.00: ATA-7: Maxtor 6V200E0, VA111900, max UDMA/133 [ 20.226423] ata1.00: 398297088 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 20.250387] ata1.00: configured for UDMA/133 [ 20.564837] ata2: SATA link down (SStatus 0 SControl 300) [ 20.575436] scsi 0:0:0:0: Direct-Access ATA Maxtor 6V200E0 VA11 PQ: 0 ANSI: 5 [ 20.575618] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB) [ 20.575629] sd 0:0:0:0: [sda] Write Protect is off [ 20.575632] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.575645] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.575693] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB) [ 20.575701] sd 0:0:0:0: [sda] Write Protect is off [ 20.575703] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.575715] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.575719] sda: sda1 sda2 sda3 [ 20.615533] sd 0:0:0:0: [sda] Attached SCSI disk [ 20.615587] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.616059] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 20.616071] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 20.616225] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 20.616291] scsi2 : sata_nv [ 20.616387] scsi3 : sata_nv [ 20.616468] ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001cc00 irq 22 [ 20.616473] ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001cc08 irq 22 [ 20.928385] ata3: SATA link down (SStatus 0 SControl 300) [ 21.251980] ata4: SATA link down (SStatus 0 SControl 300) [ 21.262520] pata_amd 0000:00:0d.0: version 0.3.8 [ 21.262559] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 21.262594] scsi4 : pata_amd [ 21.262639] scsi5 : pata_amd [ 21.262727] ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f400 irq 14 [ 21.262732] ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f408 irq 15 [ 21.598711] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 21.599012] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.599017] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 21.599156] mice: PS/2 mouse device common for all mice [ 21.599183] md: linear personality registered for level -1 [ 21.599185] md: raid0 personality registered for level 0 [ 21.599188] md: raid1 personality registered for level 1 [ 21.599190] md: raid10 personality registered for level 10 [ 21.663516] raid6: int64x1 1627 MB/s [ 21.731404] raid6: int64x2 2263 MB/s [ 21.799332] raid6: int64x4 2326 MB/s [ 21.867252] raid6: int64x8 1523 MB/s [ 21.935159] raid6: sse2x1 2573 MB/s [ 22.003072] raid6: sse2x2 3327 MB/s [ 22.070991] raid6: sse2x4 3496 MB/s [ 22.070993] raid6: using algorithm sse2x4 (3496 MB/s) [ 22.070996] md: raid6 personality registered for level 6 [ 22.070999] md: raid5 personality registered for level 5 [ 22.071000] md: raid4 personality registered for level 4 [ 22.071003] raid5: automatically using best checksumming function: generic_sse [ 22.090958] generic_sse: 5562.000 MB/sec [ 22.090960] raid5: using function: generic_sse (5562.000 MB/sec) [ 22.090963] md: multipath personality registered for level -4 [ 22.090965] md: faulty personality registered for level -5 [ 22.091073] TCP cubic registered [ 22.091147] NET: Registered protocol family 1 [ 22.091372] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 22.091379] Freeing unused kernel memory: 316k freed [ 22.142950] input: AT Translated Set 2 keyboard as /class/input/input1 [ 23.814824] kjournald starting. Commit interval 5 seconds [ 23.814842] EXT3-fs: mounted filesystem with ordered data mode. [ 32.501655] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 32.523903] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 32.639735] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 32.639770] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 33.041046] usbcore: registered new interface driver usbfs [ 33.041081] usbcore: registered new interface driver hub [ 33.041131] usbcore: registered new device driver usb [ 33.174984] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 33.174990] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 33.269063] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 33.269580] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 33.269591] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 [ 33.269598] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 33.269609] forcedeth: using HIGHDMA [ 33.356550] input: PC Speaker as /class/input/input2 [ 33.641212] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 33.792729] eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0 [ 33.793246] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 33.793259] ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 [ 33.843830] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 33.843838] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20 [ 33.843969] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 33.843977] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 33.844360] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 33.844395] ehci_hcd 0000:00:0b.1: debug port 1 [ 33.844405] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 33.844418] ehci_hcd 0000:00:0b.1: irq 20, io mem 0xfe02e000 [ 33.844426] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.844569] usb usb1: configuration #1 chosen from 1 choice [ 33.844609] hub 1-0:1.0: USB hub found [ 33.844616] hub 1-0:1.0: 8 ports detected [ 33.844702] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdbff000-fdbff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 33.952870] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 33.952876] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 33.952992] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 33.953000] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 33.953092] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 33.953111] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000 [ 33.989774] nvidia: module license 'NVIDIA' taints kernel. [ 34.247365] usb usb2: configuration #1 chosen from 1 choice [ 34.247409] hub 2-0:1.0: USB hub found [ 34.247421] hub 2-0:1.0: 8 ports detected [ 34.305530] eth0: no link during initialization. [ 34.352599] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 34.352614] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16 [ 34.352623] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 34.352819] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 [ 34.378380] input: ImPS/2 Generic Wheel Mouse as /class/input/input3 [ 34.389707] parport_pc 00:0a: reported by Plug and Play ACPI [ 34.389739] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 35.118787] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000100d153] [ 35.294084] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 35.294091] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 35.294254] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 35.440695] eth0: link up. [ 36.772870] lp0: using parport0 (interrupt-driven). [ 36.896486] Adding 265064k swap on /dev/sda3. Priority:-1 extents:1 across:265064k [ 37.212158] EXT3 FS on sda2, internal journal [ 39.507746] NET: Registered protocol family 17 [ 43.487315] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 43.524901] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00) [ 43.524938] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 [ 43.524941] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 [ 49.713417] device eth0 entered promiscuous mode [ 49.713429] audit(1195988553.040:2): dev=eth0 prom=256 old_prom=0 auid=4294967295 [ 49.729882] device eth0 left promiscuous mode [ 49.729897] audit(1195988553.056:3): dev=eth0 prom=0 old_prom=256 auid=4294967295 [ 49.740570] device eth0 entered promiscuous mode [ 49.740583] audit(1195988553.064:4): dev=eth0 prom=256 old_prom=0 auid=4294967295 [ 64.002667] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 64.143201] usb 1-2: configuration #1 chosen from 1 choice [ 64.265784] af9015_usb_probe: [ 64.266393] af9015_identify_state: reply:01 [ 64.266398] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware [ 64.633131] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' [ 64.633137] af9015_download_firmware: [ 64.730826] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state. [ 64.730969] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 64.731963] DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick) [ 64.732225] af9015_eeprom_dump: [ 64.764034] 00: 2c 80 9b 0b 00 00 00 00 a4 15 16 90 00 02 01 02 [ 64.795988] 10: 03 80 00 fa fa 10 40 ef 01 30 31 30 31 30 36 32 [ 64.827958] 20: 37 30 37 30 30 30 30 31 ff ff ff ff ff ff ff ff [ 64.859909] 30: 00 00 3a 01 00 08 02 00 1d 8d c4 04 82 ff ff ff [ 64.891872] 40: ff ff ff ff ff 08 02 00 1d 8d c4 04 82 ff ff ff [ 64.924830] 50: ff ff ff ff ff 24 00 00 04 03 09 04 10 03 41 00 [ 64.956796] 60: 66 00 61 00 74 00 65 00 63 00 68 00 10 03 44 00 [ 64.988751] 70: 56 00 42 00 2d 00 54 00 20 00 32 00 20 03 30 00 [ 65.020712] 80: 31 00 30 00 31 00 30 00 31 00 30 00 31 00 30 00 [ 65.052672] 90: 36 00 30 00 30 00 30 00 30 00 31 00 00 ff ff ff [ 65.084633] a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 65.116595] b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 65.148556] c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 65.180516] d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 65.212479] e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 65.244438] f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 65.246436] af9015_read_config: xtal:2 set adc_clock:28000 [ 65.248434] af9015_read_config: tuner id1:130 [ 65.250431] af9015_read_config: spectral inversion:0 [ 65.250433] af9015_set_gpios: [ 65.455930] af9013: firmware version: 4.95.0 [ 65.455993] DVB: registering frontend 0 (Afatech AF9013 DVB-T)... [ 65.531337] MT2060: successfully identified (IF1 = 1220) [ 66.085158] dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected. [ 66.085164] af9015_init: [ 66.096141] af9015_download_ir_table: [ 66.229242] af9015_usb_probe: [ 66.230227] af9015_identify_state: reply:02 [ 66.230230] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state. [ 66.230632] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 66.231121] DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick) [ 66.231843] af9015_eeprom_dump: [ 66.256696] 00: 2c 80 9b 0b 00 00 00 00 a4 15 16 90 00 02 01 02 [ 66.280668] 10: 03 80 00 fa fa 10 40 ef 01 30 31 30 31 30 36 32 [ 66.304638] 20: 37 30 37 30 30 30 30 31 ff ff ff ff ff ff ff ff [ 66.328622] 30: 00 00 3a 01 00 08 02 00 1d 8d c4 04 82 ff ff ff [ 66.353079] 40: ff ff ff ff ff 08 02 00 1d 8d c4 04 82 ff ff ff [ 66.377050] 50: ff ff ff ff ff 24 00 00 04 03 09 04 10 03 41 00 [ 66.402643] 60: 66 00 61 00 74 00 65 00 63 00 68 00 10 03 44 00 [ 66.426614] 70: 56 00 42 00 2d 00 54 00 20 00 32 00 20 03 30 00 [ 66.450584] 80: 31 00 30 00 31 00 30 00 31 00 30 00 31 00 30 00 [ 66.474555] 90: 36 00 30 00 30 00 30 00 30 00 31 00 00 ff ff ff [ 66.499901] a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 66.523877] b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 66.548843] c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 66.572810] d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 66.605778] e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 66.639904] f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 66.660403] af9015_read_config: xtal:2 set adc_clock:28000 [ 66.661844] af9015_read_config: tuner id1:130 [ 66.663333] af9015_read_config: spectral inversion:0 [ 66.663338] af9015_set_gpios: [ 66.666487] dvb-usb: no frontend was attached by 'Afatech AF9015 DVB-T USB2.0 stick' [ 66.666496] dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected. [ 66.666499] af9015_init: [ 66.682674] af9015_download_ir_table: [ 66.882458] usbcore: registered new interface driver dvb_usb_af9015 [ 67.132729] usbcore: registered new interface driver hiddev [ 67.133265] usbcore: registered new interface driver usbhid [ 67.133331] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 86.131252] Marking TSC unstable due to cpufreq changes [ 86.131477] Time: hpet clocksource has been installed.