[ 4107.196000] usb 1-1: new high speed USB device using ehci_hcd and address 9
[ 4107.328000] usb 1-1: configuration #1 chosen from 1 choice
[ 4107.328000] dvb-usb: found a 'Pinnacle Expresscard 320cx' in cold state, will try to load a firmware
[ 4107.332000] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 4107.516000] dib0700: firmware started successfully.
[ 4108.020000] dvb-usb: found a 'Pinnacle Expresscard 320cx' in warm state.
[ 4108.020000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 4108.020000] DVB: registering new adapter (Pinnacle Expresscard 320cx)
[ 4108.300000] DVB: registering frontend 0 (DiBcom 7000PC)...
[ 4108.300000] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner
[ 4108.300000] input: IR-receiver inside an USB DVB receiver as /class/input/input13
[ 4108.300000] dvb-usb: schedule remote query interval to 150 msecs.
[ 4108.300000] dvb-usb: Pinnacle Expresscard 320cx successfully initialized and connected.
[ 4136.252000] xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 4136.256000] dib0700: stk7700ph_xc3028_callback: XC2028_TUNER_RESET 0
[ 4136.256000] 
[ 4136.272000] xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 4136.272000] dib0700: stk7700ph_xc3028_callback: XC2028_TUNER_RESET 0
[ 4136.272000] 
[ 4139.272000] xc2028 4-0061: Loading firmware for type=D2620 DTV8 (208), id 0000000000000000.
[ 4139.324000] xc2028 4-0061: Loading SCODE for type=DTV8 SCODE HAS_IF_5400 (60000200), id 0000000000000000.
[ 4139.368000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 4139.384000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 4139.384000] 
[ 4141.004000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 4141.020000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 4141.020000] 
[ 4142.532000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 4142.548000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 4142.548000] 
[ 4144.160000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 4144.176000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 4144.176000] 
[ 4145.696000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 4145.712000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 4145.712000] 
[ 4147.324000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 4147.340000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 4147.340000] 
[ 4148.852000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 4148.868000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 4148.868000] 
[ 4150.484000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 4150.500000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 4150.500000] 
[ 4152.016000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 4152.032000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 4152.032000] 
[ 4153.644000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 4153.660000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 4153.660000] 
[ 4155.184000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 4155.204000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 4155.204000] 
[ 4156.816000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
[ 4156.832000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 4156.832000]