Uhm... that's strange, I don't have any of this cards to test, but other people reported that this solution was working. Could you post the dib0700_devices.c you're using to have a look?<br><br>Albert<br><br><div>
<span class="gmail_quote">2008/2/18, Antti Palosaari <<a href="mailto:crope@iki.fi">crope@iki.fi</a>>:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
moi<br> It does not work for me. It says same PID-filter timeout as I have got<br> earlier. I don't have amplified antenna now, but I can say that all<br> other DVB-T sticks I have are working with this small antenna. It could<br>
be that sensitivity of this hardware is bad or there is something wrong<br> with driver or firmware. Lets try to test it Windows to see if it is<br> working or not.<br> Logs attached.<br> <br><br> regards<br> Antti<br> <br>
Albert Comerma wrote:<br> <br>> Hey people, we already solved this problems. I submitted a patch a few<br> > days ago, but I think it's not on the current sources. I send again the<br> > patch. Basically it must use the same frontend description as asus cards.<br>
><br> > Albert<br> ><br> <br>> 2008/2/18, Antti Palosaari <<a href="mailto:crope@iki.fi">crope@iki.fi</a> <mailto:<a href="mailto:crope@iki.fi">crope@iki.fi</a>>>:<br> <br>><br> > moikka<br>
> I have also this device (express card). I haven't looked inside yet, but<br> > I think there is DibCOM STK7700D (in my understanding dual demod chip)<br> > and only *one* MT2266 tuner. I tried various GPIO settings but no<br>
> luck yet.<br> > GPIO6 is for MT2266.<br> > GPIO9 and GPIO10 are for frontend.<br> ><br> > Looks like tuner goes to correct frequency because I got always<br> > PID-filter timeouts when tuning to correct freq. I will now try to take<br>
> some usb-sniffs to see configuration used. Any help is welcome.<br> ><br> > regards<br> > Antti<br> ><br> > Albert Comerma wrote:<br> > > Hi!, with Michel (<a href="mailto:mm-sl@ibelgique.com">mm-sl@ibelgique.com</a><br>
<br>> <mailto:<a href="mailto:mm-sl@ibelgique.com">mm-sl@ibelgique.com</a>> <mailto:<a href="mailto:mm-sl@ibelgique.com">mm-sl@ibelgique.com</a><br> <br>> <mailto:<a href="mailto:mm-sl@ibelgique.com">mm-sl@ibelgique.com</a>>>) who<br>
><br> > > is a owner of this Yuan card we added the device to<br> > dib0700_devices, and<br> > > we got it recognized without problems. The only problem is that no<br> > > channel is detected on scan on kaffeine or other software... I<br>
> post some<br> > > dmesg. We don't know where it may be the problem... or how to<br> > detect it...<br> > ><br> > > usb 4-2: new high speed USB device using ehci_hcd and address 6<br>
> > usb 4-2: new device found, idVendor=1164, idProduct=1edc<br> > > usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=3<br> > > usb 4-2: Product: STK7700D<br> > > usb 4-2: Manufacturer: YUANRD<br>
> > usb 4-2: SerialNumber: 0000000001<br> > > usb 4-2: configuration #1 chosen from 1 choice<br> > > dvb-usb: found a 'Yuan EC372S' in cold state, will try to load a<br> > firmware<br>
> > dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'<br> > > dib0700: firmware started successfully.<br> > > dvb-usb: found a 'Yuan EC372S' in warm state.<br>
> > dvb-usb: will pass the complete MPEG2 transport stream to the<br> > software<br> > > demuxer.<br> > > DVB: registering new adapter (Yuan EC372S)<br> > > dvb-usb: no frontend was attached by 'Yuan EC372S'<br>
> > dvb-usb: will pass the complete MPEG2 transport stream to the<br> > software<br> > > demuxer.<br> > > DVB: registering new adapter (Yuan EC372S)<br> > > DVB: registering frontend 1 (DiBcom 7000PC)...<br>
> > MT2266: successfully identified<br> > > input: IR-receiver inside an USB DVB receiver as /class/input/input10<br> > > dvb-usb: schedule remote query interval to 150 msecs.<br> > > dvb-usb: Yuan EC372S successfully initialized and connected.<br>
> ><br> > ><br> ><br> > ><br> > ------------------------------------------------------------------------<br> > ><br> > > _______________________________________________<br>
> > linux-dvb mailing list<br> <br>> > <a href="mailto:linux-dvb@linuxtv.org">linux-dvb@linuxtv.org</a> <mailto:<a href="mailto:linux-dvb@linuxtv.org">linux-dvb@linuxtv.org</a>><br> <br>> > <a href="http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb">http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb</a><br>
><br> ><br> ><br> > --<br> > <a href="http://palosaari.fi/">http://palosaari.fi/</a><br> ><br> ><br> ><br> > ------------------------------------------------------------------------<br>
><br> > _______________________________________________<br> > linux-dvb mailing list<br> > <a href="mailto:linux-dvb@linuxtv.org">linux-dvb@linuxtv.org</a><br> > <a href="http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb">http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb</a><br>
<br> <br> --<br> <a href="http://palosaari.fi/">http://palosaari.fi/</a><br> <br><br> Bus 001 Device 005: ID 1164:1edc YUAN High-Tech Development Co., Ltd<br> Device Descriptor:<br> bLength 18<br> bDescriptorType 1<br>
bcdUSB 2.00<br> bDeviceClass 0 (Defined at Interface level)<br> bDeviceSubClass 0<br> bDeviceProtocol 0<br> bMaxPacketSize0 64<br> idVendor 0x1164 YUAN High-Tech Development Co., Ltd<br>
idProduct 0x1edc<br> bcdDevice 1.00<br> iManufacturer 1 YUANRD<br> iProduct 2 STK7700D<br> iSerial 3 0000000001<br> bNumConfigurations 1<br> Configuration Descriptor:<br>
bLength 9<br> bDescriptorType 2<br> wTotalLength 46<br> bNumInterfaces 1<br> bConfigurationValue 1<br> iConfiguration 0<br> bmAttributes 0xa0<br>
Remote Wakeup<br> MaxPower 500mA<br> Interface Descriptor:<br> bLength 9<br> bDescriptorType 4<br> bInterfaceNumber 0<br> bAlternateSetting 0<br>
bNumEndpoints 4<br> bInterfaceClass 255 Vendor Specific Class<br> bInterfaceSubClass 0<br> bInterfaceProtocol 0<br> iInterface 0<br> Endpoint Descriptor:<br>
bLength 7<br> bDescriptorType 5<br> bEndpointAddress 0x01 EP 1 OUT<br> bmAttributes 2<br> Transfer Type Bulk<br> Synch Type None<br>
Usage Type Data<br> wMaxPacketSize 0x0200 1x 512 bytes<br> bInterval 1<br> Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5<br>
bEndpointAddress 0x81 EP 1 IN<br> bmAttributes 2<br> Transfer Type Bulk<br> Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0200 1x 512 bytes<br>
bInterval 1<br> Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5<br> bEndpointAddress 0x82 EP 2 IN<br> bmAttributes 2<br>
Transfer Type Bulk<br> Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0200 1x 512 bytes<br> bInterval 1<br> Endpoint Descriptor:<br>
bLength 7<br> bDescriptorType 5<br> bEndpointAddress 0x83 EP 3 IN<br> bmAttributes 2<br> Transfer Type Bulk<br> Synch Type None<br>
Usage Type Data<br> wMaxPacketSize 0x0200 1x 512 bytes<br> bInterval 1<br> Device Qualifier (for other device speed):<br> bLength 10<br> bDescriptorType 6<br>
bcdUSB 2.00<br> bDeviceClass 0 (Defined at Interface level)<br> bDeviceSubClass 0<br> bDeviceProtocol 0<br> bMaxPacketSize0 64<br> bNumConfigurations 1<br> <br>Feb 18 23:50:53 localhost kernel: usb 1-8: USB disconnect, address 5<br>
Feb 18 23:50:55 localhost kernel: usb 1-8: new high speed USB device using ehci_hcd and address 6<br> Feb 18 23:50:55 localhost kernel: usb 1-8: configuration #1 chosen from 1 choice<br> Feb 18 23:50:55 localhost kernel: dib0700: loaded with support for 6 different device-types<br>
Feb 18 23:50:55 localhost kernel: dvb-usb: found a 'Yuan EC372S' in cold state, will try to load a firmware<br> Feb 18 23:50:55 localhost kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'<br>
Feb 18 23:50:55 localhost kernel: dib0700: firmware started successfully.<br> Feb 18 23:50:56 localhost kernel: dvb-usb: found a 'Yuan EC372S' in warm state.<br> Feb 18 23:50:56 localhost kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.<br>
Feb 18 23:50:56 localhost kernel: DVB: registering new adapter (Yuan EC372S)<br> Feb 18 23:50:56 localhost kernel: DVB: registering frontend 0 (DiBcom 7000PC)...<br> Feb 18 23:50:56 localhost kernel: MT2266: successfully identified<br>
Feb 18 23:50:56 localhost kernel: dvb-usb: Yuan EC372S successfully initialized and connected.<br> Feb 18 23:50:56 localhost kernel: usbcore: registered new interface driver dvb_usb_dib0700<br> <br> [crope@localhost linuxtv]$ scandvb fi-Oulu<br>
scanning fi-Oulu<br> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br> initial transponder 634000000 0 2 9 3 1 2 0<br> initial transponder 714000000 0 2 9 3 1 2 0<br> initial transponder 738000000 0 2 9 3 1 2 0<br>
initial transponder 602000000 0 2 9 3 1 2 0<br> >>> tune to: 634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE<br> WARNING: filter timeout pid 0x0011<br>
WARNING: filter timeout pid 0x0000<br> WARNING: filter timeout pid 0x0010<br> >>> tune to: 714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE<br>
WARNING: filter timeout pid 0x0011<br> WARNING: filter timeout pid 0x0000<br> WARNING: filter timeout pid 0x0010<br> >>> tune to: 738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE<br>
WARNING: filter timeout pid 0x0011<br> WARNING: filter timeout pid 0x0000<br> WARNING: filter timeout pid 0x0010<br> >>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE<br>
WARNING: filter timeout pid 0x0011<br> WARNING: filter timeout pid 0x0000<br> WARNING: filter timeout pid 0x0010<br> dumping lists (0 services)<br> Done.<br> [crope@localhost linuxtv]$<br> <br> <br></blockquote></div><br>