Feb 18 23:50:53 localhost kernel: usb 1-8: USB disconnect, address 5
Feb 18 23:50:55 localhost kernel: usb 1-8: new high speed USB device using ehci_hcd and address 6
Feb 18 23:50:55 localhost kernel: usb 1-8: configuration #1 chosen from 1 choice
Feb 18 23:50:55 localhost kernel: dib0700: loaded with support for 6 different device-types
Feb 18 23:50:55 localhost kernel: dvb-usb: found a 'Yuan EC372S' in cold state, will try to load a firmware
Feb 18 23:50:55 localhost kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
Feb 18 23:50:55 localhost kernel: dib0700: firmware started successfully.
Feb 18 23:50:56 localhost kernel: dvb-usb: found a 'Yuan EC372S' in warm state.
Feb 18 23:50:56 localhost kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Feb 18 23:50:56 localhost kernel: DVB: registering new adapter (Yuan EC372S)
Feb 18 23:50:56 localhost kernel: DVB: registering frontend 0 (DiBcom 7000PC)...
Feb 18 23:50:56 localhost kernel: MT2266: successfully identified
Feb 18 23:50:56 localhost kernel: dvb-usb: Yuan EC372S successfully initialized and connected.
Feb 18 23:50:56 localhost kernel: usbcore: registered new interface driver dvb_usb_dib0700

[crope@localhost linuxtv]$ scandvb fi-Oulu 
scanning fi-Oulu
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 634000000 0 2 9 3 1 2 0
initial transponder 714000000 0 2 9 3 1 2 0
initial transponder 738000000 0 2 9 3 1 2 0
initial transponder 602000000 0 2 9 3 1 2 0
>>> tune to: 634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.
[crope@localhost linuxtv]$