Linux video capture interface: v2.00
em28xx v4l2 driver version 0.1.0 loaded
em28xx new video device (eb1a:2881): interface 0, class 255
em28xx Has usb audio class
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
em28xx #0: em28xx chip ID = 36
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1b.0[A] -> <6>saa7133[0]: found at 0000:03:03.0, rev: 209, irq: 19, latency: 64, mmio: 0xfe8ff800
saa7133[0]: subsystem: 5168:3307, board: LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [card=94,autodetected]
saa7133[0]: board init: gpio is 10000
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x3
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:2757: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2761:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2765:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2773:    inputs: mic=0x18, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a, hash = 0xb8846b20
Vendor/Product ID= eb1a:2881
AC97 audio (5 sample rates)
USB Remote wakeup capable
500mA max power
Table at 0x04, strings=0x206a, 0x006a, 0x0000
saa7133[0]: i2c eeprom 00: 68 51 07 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 17 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 00 01 16 22 15 ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner' 2-004b: chip found @ 0x96 (saa7133[0])
tda829x 2-004b: setting tuner address to 61
tda829x 2-004b: type set to tda8290+75a
firewire_core: created device fw0: GUID 00000ae6ff5a577d, S400
tvp5150 1-005c: tvp5150am1 detected.
em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
em28xx #0: Found Pinnacle Hybrid Pro (EM2881)
em28xx audio device (eb1a:2881): interface 1, class 1
em28xx audio device (eb1a:2881): interface 2, class 1
usbcore: registered new interface driver em28xx
ALSA sound/usb/usbaudio.c:2753: 5:2:1: add audio endpoint 0x83
ALSA sound/usb/usbaudio.c:2753: 5:2:2: add audio endpoint 0x83
ALSA sound/usb/usbaudio.c:2753: 5:2:3: add audio endpoint 0x83
ALSA sound/usb/usbaudio.c:2753: 5:2:4: add audio endpoint 0x83
ALSA sound/usb/usbaudio.c:2753: 5:2:5: add audio endpoint 0x83
ALSA sound/usb/usbmixer.c:989: [2] FU [PCM Capture Switch] ch = 1, val = 0/1/1
ALSA sound/usb/usbmixer.c:406: cannot set ctl value: req = 0x4, wValue = 0x200, wIndex = 0x201, type = 4, data = 0x0/0x1
ALSA sound/usb/usbmixer.c:989: [2] FU [PCM Capture Volume] ch = 1, val = 0/0/512
usbcore: registered new interface driver snd-usb-audio
saa7133[0]: registered device video1 [v4l2]
saa7133[0]: registered device vbi1
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
tda1004x: found firmware revision 29 -- ok
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ALSA sound/usb/usbaudio.c:1327: setting usb interface 2:5
ALSA sound/usb/usbaudio.c:1327: setting usb interface 2:2
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] Initialized drm 1.1.0 20060810
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
ALSA sound/usb/usbaudio.c:1327: setting usb interface 2:2
em2880-dvb.c: DVB Init
em28xx_acquire: acquired, mode = 3
zl10353_read_register: readreg error (reg=127, ret==-19)
em2880-dvb.c: failed initializing zl10353 DVB-T demodulator
em2880-dvb.c: retrying with mt352 DVB-T demodulator
mt352_read_register: readreg error (reg=127, ret==-19)
em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb
em2880-dvb.c: DVB-T demodulator not reachable, giving up
em28xx_release: released, mode = 3
Em28xx: Initialized (Em2880 DVB Extension) extension
em28xx_acquire: acquired, mode = 2
tvp5150 1-005c: tvp5150am1 detected.
em28xx_release: released, mode = 2
em28xx_acquire: acquired, mode = 2
em28xx_release: released, mode = 2
em28xx_acquire: acquired, mode = 2
em28xx_release: released, mode = 2
em28xx_acquire: acquired, mode = 2
em28xx_release: released, mode = 2
em28xx_acquire: acquired, mode = 2
em28xx_release: released, mode = 2
em28xx_acquire: acquired, mode = 2
em28xx_release: released, mode = 2
em28xx_acquire: acquired, mode = 2
em28xx_release: released, mode = 2
em28xx_acquire: acquired, mode = 2
em28xx_release: released, mode = 2
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok