<div>
Allan,<br><br>If you have used the v4l-dvb hg drivers and my patch the card should auto detect, however if you want to force it, the number should be 10.<br><br>If you are using Chris Pascoe's xc-test branch then 5 is the correct card number, but again it should auto detect.<br><br>Please advise which driver source you have been using.<br><br>Regards Stephen.<br>
<br>
<blockquote style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;">----- Original Message -----<br>
From: "allan k" <sonofzev@iinet.net.au><br>
To: stev391@email.com<br>
Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be<br>
Date: Tue, 13 May 2008 18:19:27 +1000<br>
<br>
<br>
Hi Steve<br>
I had the wrong card number selected. I have changed to card=5 and the<br>
tuner is now working correctly.<br>
<br>
I haven't restarted the machine, but will do so later and confirm<br>
whether I am getting the same problem as you saw on one of your boxes.<br>
<br>
cheers<br>
<br>
Allan<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
On Sat, 2008-05-10 at 18:14 +1000, stev391@email.com wrote:<br>
> Allan,<br>
><br>
> It was tested with in two different machines against the cx23885<br>
> version of the card. However the next day I built another machine<br>
> with this card and I ran into errors in my dmesg stating that the<br>
> firmware version doesn't match. I haven't had enough time to find out<br>
> why this has happened, but I think the tuner is not being reset<br>
> properly. What are your results of running this patch?<br>
><br>
> Regards,<br>
><br>
> Stephen<br>
><br>
> ----- Original Message -----<br>
> From: "sonofzev@iinet.net.au" To: <br>
> linux-dvb@linuxtv.org, stev391@email.com<br>
> Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express<br>
> - When will it be<br>
> Date: Thu, 08 May 2008 18:02:00 +0800<br>
><br>
><br>
> Hi Stephen, Has this been tested with the <br>
> newer cx23885 version of the<br>
> card or only the older cx88 version. I have had <br>
> no success with my cx23885 version. cheers<br>
><br>
> Allan<br>
><br>
><br>
> On Tue May 6 11:39 , stev391@email.com sent:<br>
><br>
> G'day,<br>
><br>
> I was just wondering when Chris Pascoe's code for the<br>
> DViCO Fusion HDTV Dual Express will be merged into the<br>
> v4l-dvb tree, as there have been some minor updates<br>
> that increase the stability of the card that are not<br>
> in his tree.<br>
><br>
> Attached is a patch for merging the relevant sections<br>
> back into the v4l-dvb tree (and including updating<br>
> Kconfig). This has been successfully tested on two<br>
> different PCs with this card (working with gxine and<br>
> mythtv, in Melbourne, Australia).<br>
><br>
> Regards,<br>
> Stephen.<br>
><br>
><br>
> -- See Exclusive Video: 10th <br>
> Annual Young Hollywood<br>
> Awards<br>
><br>
><br>
><br>
> -- See Exclusive Video: 10th Annual Young Hollywood Awards<br>
><br>
</sonofzev@iinet.net.au></blockquote>
</div>
<BR>
--
<div> See Exclusive Video: <a href= "http://www.hollywoodlife.net/younghollywoodawards2008/" target="_blank"> <b> 10th Annual Young Hollywood Awards</b></a><br></div>