hi @ all,<br>I have a problem with wintv 1110 & linux <a href="http://2.6.24.5">2.6.24.5</a> .<br>The dvb card doesn't works. When I run the scan command <br>it doesn't found some channel available. <br><br>
command : scan -a 0 file_frq<br>output :>>> <br>tune to: 474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE<br>WARNING: filter timeout pid 0x0011<br>
WARNING: filter timeout pid 0x0000<br>WARNING: filter timeout pid 0x0010<br>.....<br><br>The configuration seem to be good, all essential modules are loaded in the kernel.<br>command: lsmod | grep saa<br>saa7146_vv 48768 2 budget_av,dvb_ttpci<br>
saa7146 19080 6 budget,budget_av,budget_ci,budget_core,dvb_ttpci,saa7146_vv<br>saa7134_dvb 18316 0<br>videobuf_dvb 8580 1 saa7134_dvb<br>tda1004x 19076 2 saa7134_dvb<br>
saa7134_alsa 15040 0<br>saa7134 124240 2 saa7134_dvb,saa7134_alsa<br>compat_ioctl32 5120 1 saa7134<br>videobuf_dma_sg 14852 5 saa7146_vv,saa7134_dvb,videobuf_dvb,saa7134_alsa,saa7134<br>
videobuf_core 18436 4 saa7146_vv,videobuf_dvb,saa7134,videobuf_dma_sg<br>ir_kbd_i2c 11408 1 saa7134<br>snd_pcm 72068 4 snd_pcm_oss,saa7134_alsa,snd_ens1371,snd_ac97_codec<br>ir_common 34308 3 budget_ci,saa7134,ir_kbd_i2c<br>
videodev 29824 2 saa7146_vv,saa7134<br>v4l2_common 19200 4 saa7146_vv,tuner,saa7134,videodev<br>snd 47716 11 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,saa7134_alsa,snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer<br>
v4l1_compat 17668 3 saa7146_vv,saa7134,videodev<br>i2c_core 22528 19 budget,budget_av,budget_ci,budget_core,dvb_ttpci,ttpci_eeprom,ves1820,tda827x,saa7134_dvb,tda1004x,tuner,tea5767,tda8290,tuner_simple,mt20xx,tea5761,saa7134,ir_kbd_i2c,i2c_piix4<br>
<br><br>In the directory /dev there are the devices video and dvb..<br>command : ls /dev/dvb/adapter0/<br>demux0 dvr0 frontend0 net0<br><br>command ls /dev/video*<br>/dev/video@ /dev/video0@<br><br>I have installed the v4l-dvb and dvb-apps from mercurial avaible at this address<br>
<a href="http://www.linuxtv.org/repo/">http://www.linuxtv.org/repo/</a>. and in the /lib/firmware I copied the file dvb-fe-tda10046.fw.<br><br>Now I don't know I fix this problem.<br><br>I attach the output of dmesg below<br>
command: dmesg | grep DVB<br>saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,insmod option]<br>DVB: registering new adapter (saa7133[0])<br>DVB: registering frontend 0 (Philips TDA10046H DVB-T)...<br>
<br><br>command: dmesg | grep saa<br>saa7130/34: v4l2 driver version 0.2.14 loaded<br>saa7133[0]: found at 0000:06:0e.0, rev: 209, irq: 19, latency: 64, mmio: 0xfebff800<br>saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,insmod option]<br>
saa7133[0]: board init: gpio is 6400000<br>ir-kbd-i2c: HVR 1110 detected at i2c-0/0-0071/ir0 [saa7133[0]]<br>saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92<br>saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff<br>
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff<br>saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff<br>
saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br>saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br>saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br>
saa7133[0]: i2c scan: found device @ 0x10 [???]<br>saa7133[0]: i2c scan: found device @ 0x96 [???]<br>saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]<br>saa7133[0]: i2c scan: found device @ 0xe0 [???]<br>saa7133[0]: i2c scan: found device @ 0xe2 [???]<br>
saa7133[0]: i2c scan: found device @ 0xe4 [???]<br>saa7133[0]: i2c scan: found device @ 0xe6 [???]<br>tuner 0-004b: chip found @ 0x96 (saa7133[0])<br>saa7133[0]: registered device video0 [v4l2]<br>saa7133[0]: registered device vbi0<br>
saa7133[0]: registered device radio0<br>saa7134 ALSA driver for DMA sound loaded<br>saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 19 registered as card -1<br>DVB: registering new adapter (saa7133[0])<br>saa7146: register extension 'dvb'.<br>
saa7146: register extension 'budget_ci dvb'.<br>saa7146: register extension 'budget_av'.<br>saa7146: register extension 'budget dvb'.<br><br><br>command : dmesg | grep tda<br>tda8290 0-004b: setting tuner address to 61<br>
tuner 0-004b: type set to tda8290+75a<br>tda8290 0-004b: setting tuner address to 61<br>tuner 0-004b: type set to tda8290+75a<br>tda1004x: setting up plls for 48MHz sampling clock<br>tda1004x: found firmware revision 29 -- ok<br>
<br><br>Somebody can you help me?<br><br>thanks <br><br><br>