[   10.300582] cx23885 driver version 0.0.1 loaded
[   10.301146] cx23885 0000:04:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[   10.301284] CORE cx23885[0]: subsystem: 0070:71d3, board: Hauppauge WinTV-HVR1200 [card=7,autodetected]
[   10.467050] tveeprom 0-0050: Hauppauge model 71949, rev H2E9, serial# 3390611
[   10.467120] tveeprom 0-0050: MAC address is 00-0D-FE-33-BC-93
[   10.467185] tveeprom 0-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
[   10.467259] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[   10.467337] tveeprom 0-0050: audio processor is CX23885 (idx 39)
[   10.467402] tveeprom 0-0050: decoder processor is CX23885 (idx 33)
[   10.467468] tveeprom 0-0050: has no radio
[   10.467531] cx23885[0]: hauppauge eeprom: model=71949
[   10.467597] cx23885_dvb_register() allocating 1 frontend(s)
[   10.467687] cx23885[0]: cx23885 based dvb card
[   10.926369] tda829x 1-0042: type set to tda8295
[   11.068189] tda18271 1-0060: creating new instance
[   11.104359] TDA18271HD/C1 detected @ 1-0060
[   12.165988] DVB: registering new adapter (cx23885[0])
[   12.166056] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
[   12.166548] cx23885_dev_checkrevision() Hardware revision = 0xb0
[   12.166617] cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xef800000
[   12.166697] cx23885 0000:04:00.0: setting latency timer to 64
[  373.247511] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
[  373.247518] firmware: requesting dvb-fe-tda10048-1.0.fw
[  373.262265] tda10048_firmware_upload: firmware read 24878 bytes.
[  373.262270] tda10048_firmware_upload: firmware uploading
[  375.822028] tda10048_firmware_upload: firmware uploaded