[vdr] diseqc.conf for rotor plugin

[Rudy Sgorlon]

Today I have the time to test my motor stab HH100.
I use for test two satellites position in my diseqc.conf:

#Hot Bird
S13E 11700 V 9750 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 
01] W15 t
S13E 99999 V 10600 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 
01] W15 T
S13E 11700 H 9750 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 
01] W15 t
S13E 99999 H 10600 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 
01] W15 T

#Astra
S19.2E 11700 V 9750 t v W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 
02] W15 t
S19.2E 99999 V 10600 t v W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 
02] W15 T
S19.2E 11700 H 9750 t V W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 
02] W15 t
S19.2E 99999 H 10600 t V W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 
02] W15  T       

I try to drive the motor east or ovest with the menu command,  but the 
motor don't move.
Also the gotox function I have the same problem.
In log files I have this erros:

Apr 24 18:17:46 vdrbox vdr[2939]: ERROR (diseqc.c,70): Operation not 
permitted
Apr 24 18:17:46 vdrbox vdr[2939]: ERROR (diseqc.c,74): Operation not 
permitted
Apr 24 18:17:46 vdrbox vdr[2939]: ERROR (diseqc.c,76): Operation not 
permitted

Where I mistake?

Rudy.



Martin Spears ha scritto:

>here is my rotor diseqc.conf file
>
># DiSEqC configuration for VDR
>#
># Format:
>#
># satellite slof polarization lof command...
>#
># satellite:      one of the 'S' codes defined in sources.conf
># slof:           switch frequency of LNB; the first entry with
>#                 an slof greater than the actual transponder
>#                 frequency will be used
># polarization:   V = vertical, H = horizontal
># lof:            the local oscillator frequency to subtract from
>#                 the actual transponder frequency
># command:
>#   t         tone off
>#   T         tone on
>#   v         voltage low (13V)
>#   V         voltage high (18V)
>#   A         mini A
>#   B         mini B
>#   Wnn       wait nn milliseconds (nn may be any positive integer
>number)
>#   [xx ...]  hex code sequence (max. 6)
>#
># The 'command...' part is optional.
>#
># Examples:
>
># Full DiSEqC sequence:
>#
># Einstellen des SG-2100 Motors:
># 
># in Richtung 10 Grad drehen (Antenne zur Wand)
># Den Resetkopf drücken und 2 Sekunden lang halten
># Dann ist die eingestellte Tabelle aktiv. Durch drücken 
># von Kanal 1 (ARD) oder einem Kanal der auf HotBird liegt,
># wird die Position angefahren.
>#
># (R) rob, 02.11.2003, 00:15 Uhr bei Regen ;-(
>#
>S119W 11250 V 99999 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B
>01] W15 t
>S119W 99999 V 11250 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B
>01] W15 T
>S119W 11250 H 99999 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B
>01] W15 t
>S119W 99999 H 11250 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B
>01] W15 T
>
>S110W 11250 V 99999 t v W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B
>02] W15 t
>S110W 99999 V 11250 t v W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B
>02] W15 T
>S110W 11250 H 99999 t V W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B
>02] W15 t
>S110W 99999 H 11250 t V W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B
>02] W15 T
>
>S61.5W 11250 V 99999 t v W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B
>03] W15 t
>S61.5W 99999 V 11250 t v W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B
>03] W15 T
>S61.5W 11250 H 99999 t V W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B
>03] W15 t
>S61.5W 99999 H 11250 t V W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B
>03] W15 T
>
>S91W 11250 V 99999 t v W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B
>04] W15 t
>S91W 99999 V 11250 t v W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B
>04] W15 T
>S91W 11250 H 99999 t V W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B
>04] W15 t
>S91W 99999 H 11250 t V W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B
>04] W15 T
>
>S7E 11700 V 9750 t v W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05]
>W15 t
>S7E 99999 V 10600 t v W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B
>05] W15 T
>S7E 11700 H 9750 t V W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05]
>W15 t
>S7E 99999 H 10600 t V W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B
>05] W15 T
>
>S5E 11700 V 9750 t v W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06]
>W15 t
>S5E 99999 V 10600 t v W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B
>06] W15 T
>S5E 11700 H 9750 t V W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06]
>W15 t
>S5E 99999 H 10600 t V W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B
>06] W15 T
>
>S5W 11700 V 9750 t v W15 [E0 31 6B 09] W1 [E0 31 6B 09] W1 [E0 31 6B 09]
>W15 t
>S5W 99999 V 10600 t v W15 [E0 31 6B 09] W1 [E0 31 6B 09] W1 [E0 31 6B
>09] W15 T
>S5W 11700 H 9750 t V W15 [E0 31 6B 09] W1 [E0 31 6B 09] W1 [E0 31 6B 09]
>W15 t
>S5W 99999 H 10600 t V W15 [E0 31 6B 09] W1 [E0 31 6B 09] W1 [E0 31 6B
>09] W15 T
>
>S8W 11700 V 9750 t v W15 [E0 31 6B 0A] W1 [E0 31 6B 0A] W1 [E0 31 6B 0A]
>W15 t
>S8W 99999 V 10600 t v W15 [E0 31 6B 0A] W1 [E0 31 6B 0A] W1 [E0 31 6B
>0A] W15 T
>S8W 11700 H 9750 t V W15 [E0 31 6B 0A] W1 [E0 31 6B 0A] W1 [E0 31 6B 0A]
>W15 t
>S8W 99999 H 10600 t V W15 [E0 31 6B 0A] W1 [E0 31 6B 0A] W1 [E0 31 6B
>0A] W15 T
>
>S18W 11700 V 9750 t v W15 [E0 31 6B 0B] W1 [E0 31 6B 0B] W1 [E0 31 6B
>0B] W15 t
>S18W 99999 V 10600 t v W15 [E0 31 6B 0B] W1 [E0 31 6B 0B] W1 [E0 31 6B
>0B] W15 T
>S18W 11700 H 9750 t V W15 [E0 31 6B 0B] W1 [E0 31 6B 0B] W1 [E0 31 6B
>0B] W15 t
>S18W 99999 H 10600 t V W15 [E0 31 6B 0B] W1 [E0 31 6B 0B] W1 [E0 31 6B
>0B] W15 T
>
>S21.5W 11700 V 9750 t v W15 [E0 31 6B 0C] W1 [E0 31 6B 0C] W1 [E0 31 6B
>0C] W15 t
>S21.5W 99999 V 10600 t v W15 [E0 31 6B 0C] W1 [E0 31 6B 0C] W1 [E0 31 6B
>0C] W15 T
>S21.5W 11700 H 9750 t V W15 [E0 31 6B 0C] W1 [E0 31 6B 0C] W1 [E0 31 6B
>0C] W15 t
>S21.5W 99999 H 10600 t V W15 [E0 31 6B 0C] W1 [E0 31 6B 0C] W1 [E0 31 6B
>0C] W15 T
>
>S27.5W 11700 V 9750 t v W15 [E0 31 6B 0D] W1 [E0 31 6B 0D] W1 [E0 31 6B
>0D] W15 t
>S27.5W 99999 V 10600 t v W15 [E0 31 6B 0D] W1 [E0 31 6B 0D] W1 [E0 31 6B
>0D] W15 T
>S27.5W 11700 H 9750 t V W15 [E0 31 6B 0D] W1 [E0 31 6B 0D] W1 [E0 31 6B
>0D] W15 t
>S27.5W 99999 H 10600 t V W15 [E0 31 6B 0D] W1 [E0 31 6B 0D] W1 [E0 31 6B
>0D] W15 T
>
>S30W 11700 V 9750 t v W15 [E0 31 6B 0E] W1 [E0 31 6B 0E] W1 [E0 31 6B
>0E] W15 t
>S30W 99999 V 10600 t v W15 [E0 31 6B 0E] W1 [E0 31 6B 0E] W1 [E0 31 6B
>0E] W15 T
>S30W 11700 H 9750 t V W15 [E0 31 6B 0E] W1 [E0 31 6B 0E] W1 [E0 31 6B
>0E] W15 t
>S30W 99999 H 10600 t V W15 [E0 31 6B 0E] W1 [E0 31 6B 0E] W1 [E0 31 6B
>0E] W15 T
>
>S37.5W 11700 V 9750 t v W15 [E0 31 6B 0F] W1 [E0 31 6B 0F] W1 [E0 31 6B
>0F] W15 t
>S37.5W 99999 V 10600 t v W15 [E0 31 6B 0F] W1 [E0 31 6B 0F] W1 [E0 31 6B
>0F] W15 T
>S37.5W 11700 H 9750 t V W15 [E0 31 6B 0F] W1 [E0 31 6B 0F] W1 [E0 31 6B
>0F] W15 t
>S37.5W 99999 H 10600 t V W15 [E0 31 6B 0F] W1 [E0 31 6B 0F] W1 [E0 31 6B
>0F] W15 T
>
>S23.5E 11700 V 9750 t v W15 [E0 31 6B 10] W1 [E0 31 6B 10] W1 [E0 31 6B
>10] W15 t
>S23.5E 99999 V 10600 t v W15 [E0 31 6B 10] W1 [E0 31 6B 10] W1 [E0 31 6B
>10] W15 T
>S23.5E 11700 H 9750 t V W15 [E0 31 6B 10] W1 [E0 31 6B 10] W1 [E0 31 6B
>10] W15 t
>S23.5E 99999 H 10600 t V W15 [E0 31 6B 10] W1 [E0 31 6B 10] W1 [E0 31 6B
>10] W15 T
>
>S26E 11700 V 9750 t v W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B
>11] W15 t
>S26E 99999 V 10600 t v W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B
>11] W15 T
>S26E 11700 H 9750 t V W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B
>11] W15 t
>S26E 99999 H 10600 t V W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B
>11] W15 T
>
>S28.5E 11700 V 9750 t v W15 [E0 31 6B 12] W1 [E0 31 6B 12] W1 [E0 31 6B
>12] W15 t
>S28.5E 99999 V 10600 t v W15 [E0 31 6B 12] W1 [E0 31 6B 12] W1 [E0 31 6B
>12] W15 T
>S28.5E 11700 H 9750 t V W15 [E0 31 6B 12] W1 [E0 31 6B 12] W1 [E0 31 6B
>12] W15 t
>S28.5E 99999 H 10600 t V W15 [E0 31 6B 12] W1 [E0 31 6B 12] W1 [E0 31 6B
>12] W15 T
>
>S30.5E 11700 V 9750 t v W15 [E0 31 6B 14] W1 [E0 31 6B 14] W1 [E0 31 6B
>14] W15 t
>S30.5E 99999 V 10600 t v W15 [E0 31 6B 14] W1 [E0 31 6B 14] W1 [E0 31 6B
>14] W15 T
>S30.5E 11700 H 9750 t V W15 [E0 31 6B 14] W1 [E0 31 6B 14] W1 [E0 31 6B
>14] W15 t
>S30.5E 99999 H 10600 t V W15 [E0 31 6B 14] W1 [E0 31 6B 14] W1 [E0 31 6B
>14] W15 T
>
>S31.3E 11700 V 9750 t v W15 [E0 31 6B 15] W1 [E0 31 6B 15] W1 [E0 31 6B
>15] W15 t
>S31.3E 99999 V 10600 t v W15 [E0 31 6B 15] W1 [E0 31 6B 15] W1 [E0 31 6B
>15] W15 T
>S31.3E 11700 H 9750 t V W15 [E0 31 6B 15] W1 [E0 31 6B 15] W1 [E0 31 6B
>15] W15 t
>S31.3E 99999 H 10600 t V W15 [E0 31 6B 15] W1 [E0 31 6B 15] W1 [E0 31 6B
>15] W15 T
>
>S42E 11700 V 9750 t v W15 [E0 31 6B 16] W1 [E0 31 6B 16] W1 [E0 31 6B
>16] W15 t
>S42E 99999 V 10600 t v W15 [E0 31 6B 16] W1 [E0 31 6B 16] W1 [E0 31 6B
>16] W15 T
>S42E 11700 H 9750 t V W15 [E0 31 6B 16] W1 [E0 31 6B 16] W1 [E0 31 6B
>16] W15 t
>S42E 99999 H 10600 t V W15 [E0 31 6B 16] W1 [E0 31 6B 16] W1 [E0 31 6B
>16] W15 T
>
>S45W 11700 V 9750 t v W15 [E0 31 6B 18] W1 [E0 31 6B 18] W1 [E0 31 6B
>18] W15 t
>S45W 99999 V 10600 t v W15 [E0 31 6B 18] W1 [E0 31 6B 18] W1 [E0 31 6B
>18] W15 T
>S45W 11700 H 9750 t V W15 [E0 31 6B 18] W1 [E0 31 6B 18] W1 [E0 31 6B
>18] W15 t
>S45W 99999 H 10600 t V W15 [E0 31 6B 18] W1 [E0 31 6B 18] W1 [E0 31 6B
>18] W15 T
>
>S4W 11700 V 9750 t v W15 [E0 31 6B 19] W1 [E0 31 6B 19] W1 [E0 31 6B 19]
>W15 t
>S4W 99999 V 10600 t v W15 [E0 31 6B 19] W1 [E0 31 6B 19] W1 [E0 31 6B
>19] W15 T
>S4W 11700 H 9750 t V W15 [E0 31 6B 19] W1 [E0 31 6B 19] W1 [E0 31 6B 19]
>W15 t
>S4W 99999 H 10600 t V W15 [E0 31 6B 19] W1 [E0 31 6B 19] W1 [E0 31 6B
>19] W15 T
>
>S1W 11700 V 9750 t v W15 [E0 31 6B 1A] W1 [E0 31 6B 1A] W1 [E0 31 6B 1A]
>W15 t
>S1W 99999 V 10600 t v W15 [E0 31 6B 1A] W1 [E0 31 6B 1A] W1 [E0 31 6B
>1A] W15 T
>S1W 11700 H 9750 t V W15 [E0 31 6B 1A] W1 [E0 31 6B 1A] W1 [E0 31 6B 1A]
>W15 t
>S1W 99999 H 10600 t V W15 [E0 31 6B 1A] W1 [E0 31 6B 1A] W1 [E0 31 6B
>1A] W15 T
>
>S7W 11700 V 9750 t v W15 [E0 31 6B 1B] W1 [E0 31 6B 1B] W1 [E0 31 6B 1B]
>W15 t
>S7W 99999 V 10600 t v W15 [E0 31 6B 1B] W1 [E0 31 6B 1B] W1 [E0 31 6B
>1B] W15 T
>S7W 11700 H 9750 t V W15 [E0 31 6B 1B] W1 [E0 31 6B 1B] W1 [E0 31 6B 1B]
>W15 t
>S7W 99999 H 10600 t V W15 [E0 31 6B 1B] W1 [E0 31 6B 1B] W1 [E0 31 6B
>1B] W15 T
>
>S12.5W 11700 V 9750 t v W15 [E0 31 6B 1C] W1 [E0 31 6B 1C] W1 [E0 31 6B
>1C] W15 t
>S12.5W 99999 V 10600 t v W15 [E0 31 6B 1C] W1 [E0 31 6B 1C] W1 [E0 31 6B
>1C] W15 T
>S12.5W 11700 H 9750 t V W15 [E0 31 6B 1C] W1 [E0 31 6B 1C] W1 [E0 31 6B
>1C] W15 t
>S12.5W 99999 H 10600 t V W15 [E0 31 6B 1C] W1 [E0 31 6B 1C] W1 [E0 31 6B
>1C] W15 T
>
>
>
>
>
>On Tue, 2005-03-15 at 20:47 +0100, Rudy Sgorlon wrote:
>  
>
>>Hello,
>>I don't know the exact disecq command to write in file diseqc.conf.
>>How I have to modify the disecq.conf?
>>
>>
>>Thank's,
>>Rudy.
>>
>>_______________________________________________
>>vdr mailing list
>>vdr at linuxtv.org
>>http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>>    
>>
>
>
>_______________________________________________
>vdr mailing list
>vdr at linuxtv.org
>http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
>  
>